Celestion BN10-300X8
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 64.3 Hz |
| Qts | 0.382 |
| Qes | 0.42 |
| Qms | 4.2 |
| Vas | 28.8 L |
| Sd | 346.3 cm² |
| Xmax | 4 mm |
| Re | 6.06 Ω |
| Bl | 14.4 T·m |
| Mms | 35.7 g |
| Pe | 300 W |
| Sensitivity | 95.8 dB |
Alignment hint
| EBP | 153 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 11.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| BMS 10C262 | 65 +0.7 | 0.368 -0.01 | 25.5 -3.3 | 5.1 +1.1 | 95.7 -0.1 | close | + | |
| 18 Sound 10W650 | 64 -0.3 | 0.41 +0.03 | 27 -1.8 | 5.7 +1.7 | 96 +0.2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Celestion BN10-300X | 64.2 -0.1 | 0.432 +0.05 | 29.2 +0.4 | 4 = | 96.9 +1.1 | close | + | |
| B&C 10 CL 51 | 60 -4.3 | 0.394 +0.01 | 31 +2.2 | 3.7 -0.3 | 95.7 -0.1 | close | 150 W vs 300 W: lower power handling · Xmax 3.7 mm < 4 mm: lower excursion-limited SPL | + |
| LaVoce WSF102.50 | 64 -0.3 | 0.335 -0.05 | 29 +0.2 | 3.9 -0.1 | 97 +1.2 | close | Xmax 3.9 mm < 4 mm: lower excursion-limited SPL | + |
| Celestion BN10-300X(4) | 64.2 -0.1 | 0.43 +0.05 | 29.2 +0.4 | 4 = | 93.8 -2 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 300 W: lower power handling | + |
| Faital PRO 10HX230 | 65 +0.7 | 0.348 -0.03 | 25.8 -3 | 4 = | 96.6 +0.8 | close | + | |
| Faital PRO 10PR310 8 Ohms | 60 -4.3 | 0.339 -0.04 | 28 -0.8 | 4.6 +0.6 | 95.9 +0.1 | close | + | |
| LaVoce FBASS10-18 | 65 +0.7 | 0.43 +0.05 | 32.4 +3.6 | 4.5 +0.5 | 96 +0.2 | close | 150 W vs 300 W: lower power handling | + |
| the box Speaker 10-250/8-A | 56.8 -7.5 | 0.38 = | 33.3 +4.5 | 4 = | 95.2 -0.6 | close | + |
Compare the closest 3 against the BN10-300X8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.