Celestion BN10-300X

10" · 8 Ω · 300 W · 96.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	64.2 Hz
Qts	0.432
Qes	0.497
Qms	3.327
Vas	29.2 L
Sd	346 cm²
Xmax	4 mm
Re	4 Ω
Bl	10.7 T·m
Mms	35.4 g
Pe	300 W
Sensitivity	96.9 dB

Alignment hint

EBP	129 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 17.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Celestion BN10-300X(4)	64.2 =	0.43 =	29.2 =	4 =	93.8 -3.1	close	4 Ω vs 8 Ω: amp load changes · 150 W vs 300 W: lower power handling	+
Faital PRO 10PR310	65 +0.8	0.47 +0.04	29 -0.2	4.92 +0.92	97 +0.1	close	16 Ω vs 8 Ω: amp load changes	+
LaVoce FBASS10-18	65 +0.8	0.43 =	32.4 +3.2	4.5 +0.5	96 -0.9	close	150 W vs 300 W: lower power handling	+
Eminence DELTA-10A-2	69.7 +5.5	0.44 +0.01	29.73 +0.53	6.39 +2.39	96.7 -0.2	close		+
Celestion BN10-300X8	64.3 +0.1	0.382 -0.05	28.8 -0.4	4 =	95.8 -1.1	close		+
Faital PRO 10PR300	65 +0.8	0.48 +0.05	30.6 +1.4	4.92 +0.92	97 +0.1	close	16 Ω vs 8 Ω: amp load changes	+
18 Sound 10W650	64 -0.2	0.41 -0.02	27 -2.2	5.7 +1.7	96 -0.9	close	16 Ω vs 8 Ω: amp load changes	+
LaVoce WSF102.00	65 +0.8	0.45 +0.02	34.03 +4.83	5.2 +1.2	97 +0.1	close	175 W vs 300 W: lower power handling	+
Jensen SMOOTH BS 10N/250A	58 -6.2	0.429 =	30.9 +1.7	4.7 +0.7	95.1 -1.8	close		+
Jensen BS10N/250	58 -6.2	0.438 +0.01	30.9 +1.7	4.8 +0.8	95 -1.9	close		+

Compare the closest 3 against the BN10-300X →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.