Celestion BN10-300S4
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 80.7 Hz |
| Qts | 0.437 |
| Qes | 0.52 |
| Qms | 2.73 |
| Vas | 21.8 L |
| Sd | 344 cm² |
| Xmax | 3.5 mm |
| Re | 2.81 Ω |
| Bl | 9 T·m |
| Mms | 29.6 g |
| Pe | 300 W |
| Sensitivity | 100 dB |
Alignment hint
| EBP | 155 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 13.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 10M150 | 74 -6.7 | 0.43 -0.01 | 25.9 +4.1 | 3.25 -0.25 | 99 -1 | close | 8 Ω vs 4 Ω: amp load changes · 150 W vs 300 W: lower power handling · Xmax 3.25 mm < 3.5 mm: lower excursion-limited SPL | + |
| LaVoce WAN102.50-16 | 76 -4.7 | 0.43 -0.01 | 24.11 +2.31 | 5.5 +2 | 97 -3 | close | 16 Ω vs 4 Ω: amp load changes | + |
| Selenium 10MB3P | 80 -0.7 | 0.46 +0.02 | 23 +1.2 | 6 +2.5 | 95.8 -4.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 10CLA64 | 72 -8.7 | 0.41 -0.03 | 21 -0.8 | 4.5 +1 | 96 -4 | usable | 16 Ω vs 4 Ω: amp load changes | + |
| LaVoce WSN102.50 | 76 -4.7 | 0.39 -0.05 | 20.71 -1.09 | 2.9 -0.6 | 97.5 -2.5 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 2.9 mm < 3.5 mm: lower excursion-limited SPL | + |
| B&C 10CLA64 | 74 -6.7 | 0.42 -0.02 | 18.5 -3.3 | 5 +1.5 | 96 -4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Precision Devices PD102 ER | 81.8 +1.1 | 0.523 +0.09 | 26 +4.2 | 5 +1.5 | 98 -2 | usable | 16 Ω vs 4 Ω: amp load changes · 100 W vs 300 W: lower power handling | + |
| LaVoce WAN102.50 | 78 -2.7 | 0.35 -0.09 | 22.4 +0.6 | 5.1 +1.6 | 97 -3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| RCF MB 10G251 | 76 -4.7 | 0.335 -0.1 | 24 +2.2 | 3.5 = | 98.6 -1.4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Celestion FTX1025 | 71.5 -9.2 | 0.44 = | 25.9 +4.1 | 3 -0.5 | 96.2 -3.8 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 3 mm < 3.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the BN10-300S4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.