Celestion BN10-200X
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50.7 Hz |
| Qts | 0.274 |
| Qes | 0.297 |
| Qms | 3.7 |
| Vas | 52.1 L |
| Sd | 346 cm² |
| Xmax | 3.8 mm |
| Re | 5.9 Ω |
| Bl | 14.3 T·m |
| Mms | 32.2 g |
| Pe | 200 W |
| Sensitivity | 95.4 dB |
Alignment hint
| EBP | 171 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 10NW650 | 51 +0.3 | 0.27 = | 50 -2.1 | 7 +3.2 | 95.5 +0.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 10NW650 | 51 +0.3 | 0.28 +0.01 | 48 -4.1 | 7 +3.2 | 96 +0.6 | close | + | |
| Beyma 10WR300 | 47 -3.7 | 0.287 +0.01 | 50.5 -1.6 | 5.8 +2 | 95.5 +0.1 | close | + | |
| Faital PRO 10PR320 | 48 -2.7 | 0.29 +0.02 | 52.7 +0.6 | 7.37 +3.57 | 96 +0.6 | close | + | |
| Faital PRO 10PR300 | 50 -0.7 | 0.24 -0.03 | 49.8 -2.3 | 4.92 +1.12 | 96 +0.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
| P.Audio E10-200S v2011 | 55.4 +4.7 | 0.272 = | 44.6 -7.5 | 4 +0.2 | 96.9 +1.5 | close | + | |
| STX W.25.400.8.MCX | 54 +3.3 | 0.282 +0.01 | 50 -2.1 | 3.5 -0.3 | 98 +2.6 | close | Xmax 3.5 mm < 3.8 mm: lower excursion-limited SPL | + |
| Audax PR24ST150 | 49 -1.7 | 0.263 -0.01 | 43 -9.1 | 3.5 -0.3 | 95.8 +0.4 | close | 150 W vs 200 W: lower power handling · Xmax 3.5 mm < 3.8 mm: lower excursion-limited SPL | + |
| PRV Audio 10MB500 | 50.5 -0.2 | 0.313 +0.04 | 46.2 -5.9 | 4.3 +0.5 | 94.8 -0.6 | close | + | |
| Beyma 10MW/ND | 47 -3.7 | 0.26 -0.01 | 48 -4.1 | 5.9 +2.1 | 96.3 +0.9 | close | + |
Compare the closest 3 against the BN10-200X →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.