Celestion BN10-200S8
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 89.4 Hz |
| Qts | 0.352 |
| Qes | 0.38 |
| Qms | 4.82 |
| Vas | 20.5 L |
| Sd | 344 cm² |
| Xmax | 2.5 mm |
| Re | 5.47 Ω |
| Bl | 14.4 T·m |
| Mms | 25.6 g |
| Pe | 200 W |
| Sensitivity | 99.5 dB |
Alignment hint
| EBP | 235 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL 2123H | 85 -4.4 | 0.322 -0.03 | 19.8 -0.7 | 2.5 = | 100 +0.5 | close | + | |
| PHL Audio 3451 | 91 +1.6 | 0.353 = | 17.8 -2.7 | 2.1 -0.4 | 99.3 -0.2 | close | Xmax 2.1 mm < 2.5 mm: lower excursion-limited SPL | + |
| RCF L 10/581K | 85 -4.4 | 0.369 +0.02 | 25 +4.5 | 2.5 = | 99.9 +0.4 | close | + | |
| JBL 2123J | 85 -4.4 | 0.322 -0.03 | 19.8 -0.7 | 2.5 = | 96.8 -2.7 | close | 16 Ω vs 8 Ω: amp load changes | + |
| RCF MR 10H300 | 90 +0.6 | 0.312 -0.04 | 16.5 -4 | 2.7 +0.2 | 98.9 -0.6 | close | + | |
| LaVoce WSN102.50 | 76 -13.4 | 0.39 +0.04 | 20.71 +0.21 | 2.9 +0.4 | 97.5 -2 | close | + | |
| LaVoce WAN102.50 | 78 -11.4 | 0.35 = | 22.4 +1.9 | 5.1 +2.6 | 97 -2.5 | usable | + | |
| 18 Sound 10NMB420 vp CF1 | 84.8 -4.6 | 0.318 -0.03 | 26 +5.5 | 3.3 +0.8 | 100.2 +0.7 | usable | + | |
| RCF MB 10G251 | 76 -13.4 | 0.335 -0.02 | 24 +3.5 | 3.5 +1 | 98.6 -0.9 | usable | + | |
| PHL Audio 3040 | 86 -3.4 | 0.393 +0.04 | 24 +3.5 | 2 -0.5 | 98.7 -0.8 | usable | Xmax 2 mm < 2.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the BN10-200S8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.