Celestion BL10-200X

10" · 8 Ω · 200 W · 93.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	73 Hz
Qts	0.48
Qes	0.56
Qms	3.6
Vas	22.74 L
Sd	351 cm²
Xmax	4 mm
Re	5.8 Ω
Bl	13 T·m
Mms	36.6 g
Pe	200 W
Sensitivity	93.8 dB

Alignment hint

EBP	130 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 19.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Celestion BL10-100X	74.4 +1.4	0.532 +0.05	25.1 +2.36	3.5 -0.5	93.8 =	close	100 W vs 200 W: lower power handling · Xmax 3.5 mm < 4 mm: lower excursion-limited SPL	+
Selenium 10MB3P	80 +7	0.46 -0.02	23 +0.26	6 +2	95.8 +2	close		+
Hartke 10XL16	69.3 -3.7	0.47 -0.01	27.3 +4.56	5 +1	92.5 -1.3	close	16 Ω vs 8 Ω: amp load changes	+
18 Sound 10W650	67 -6	0.48 =	26 +3.26	5.7 +1.7	96 +2.2	close		+
Faital PRO 10PR300-16	65 -8	0.477 =	26.7 +3.96	4.9 +0.9	91.7 -2.1	close	16 Ω vs 8 Ω: amp load changes	+
B&C 10CLA64	72 -1	0.41 -0.07	21 -1.74	4.5 +0.5	96 +2.2	close	16 Ω vs 8 Ω: amp load changes	+
LaVoce WAN102.50-16	76 +3	0.43 -0.05	24.11 +1.37	5.5 +1.5	97 +3.2	close	16 Ω vs 8 Ω: amp load changes	+
LaVoce WAF102.52	66 -7	0.412 -0.07	23.5 +0.76	4.5 +0.5	96 +2.2	usable		+
Celestion PULSE 10	68 -5	0.439 -0.04	25.8 +3.06	3.4 -0.6	95.1 +1.3	usable	Xmax 3.4 mm < 4 mm: lower excursion-limited SPL	+
Celestion BN10-300X(4)	64.2 -8.8	0.43 -0.05	29.2 +6.46	4 =	93.8 =	usable	4 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling	+

Compare the closest 3 against the BL10-200X →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.