Celestion BL10-100X

10" · 8 Ω · 100 W · 93.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	74.4 Hz
Qts	0.532
Qes	0.653
Qms	2.88
Vas	25.1 L
Sd	346 cm²
Xmax	3.5 mm
Re	6.67 Ω
Bl	11.98 T·m
Mms	28.7 g
Pe	100 W
Sensitivity	93.8 dB

Alignment hint

EBP	114 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 32.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Celestion BL10-200X	73 -1.4	0.48 -0.05	22.74 -2.36	4 +0.5	93.8 =	close		+
LaVoce FBASS10-18-16	70 -4.4	0.57 +0.04	28.39 +3.29	4.8 +1.3	95 +1.2	close	16 Ω vs 8 Ω: amp load changes	+
Precision Devices PD102 ER	81.8 +7.4	0.523 -0.01	26 +0.9	5 +1.5	98 +4.2	close	16 Ω vs 8 Ω: amp load changes	+
Hartke 10XL16	69.3 -5.1	0.47 -0.06	27.3 +2.2	5 +1.5	92.5 -1.3	close	16 Ω vs 8 Ω: amp load changes	+
Celestion PULSE 10	68 -6.4	0.439 -0.09	25.8 +0.7	3.4 -0.1	95.1 +1.3	usable	Xmax 3.4 mm < 3.5 mm: lower excursion-limited SPL	+
18 Sound 10W650	67 -7.4	0.48 -0.05	26 +0.9	5.7 +2.2	96 +2.2	usable		+
Faital PRO 10PR300-16	65 -9.4	0.477 -0.06	26.7 +1.6	4.9 +1.4	91.7 -2.1	usable	16 Ω vs 8 Ω: amp load changes	+
Selenium 10MB3P	80 +5.6	0.46 -0.07	23 -2.1	6 +2.5	95.8 +2	usable		+
Celestion FTX1025	71.5 -2.9	0.44 -0.09	25.9 +0.8	3 -0.5	96.2 +2.4	usable	Xmax 3 mm < 3.5 mm: lower excursion-limited SPL	+
LaVoce WAN102.50-16	76 +1.6	0.43 -0.1	24.11 -0.99	5.5 +2	97 +3.2	usable	16 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the BL10-100X →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.