Celestion BL 10-100

10" · 8 Ω · 100 W · 95.7 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	70 Hz
Qts	0.608
Qes	0.66
Qms	7.64
Vas	33 L
Sd	335 cm²
Xmax	3.3 mm
Re	5.8 Ω
Bl	9.8 T·m
Mms	24.6 g
Pe	100 W
Sensitivity	95.7 dB

Alignment hint

EBP	106 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 93.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
RCF L10CX1AK	67.9 -2.1	0.59 -0.02	33 =	3 -0.3	93.6 -2.1	close	60 W vs 100 W: lower power handling · Xmax 3 mm < 3.3 mm: lower excursion-limited SPL	+
LaVoce FBASS10-18-16	70 =	0.57 -0.04	28.39 -4.61	4.8 +1.5	95 -0.7	close	16 Ω vs 8 Ω: amp load changes	+
Fenton NS10X	67.5 -2.5	0.563 -0.05	40.2 +7.2	3.8 +0.5	95.6 -0.1	close		+
Peerless FSL-1015R02-08	68.4 -1.6	0.616 +0.01	37.7 +4.7	2.2 -1.1	95.9 +0.2	close	75 W vs 100 W: lower power handling · Xmax 2.2 mm < 3.3 mm: lower excursion-limited SPL	+
Fenton PS10F vp	60.1 -9.9	0.586 -0.02	41.2 +8.2	4 +0.7	93.3 -2.4	usable	16 Ω vs 8 Ω: amp load changes	+
Radian CRS1030	65 -5	0.472 -0.14	35.3 +2.3	5.5 +2.2	96.2 +0.5	usable		+
Hyper Phase CM10	65 -5	0.511 -0.1	45 +12	3.3 =	95.6 -0.1	usable		+
Celestion BL10-100X	74.4 +4.4	0.532 -0.08	25.1 -7.9	3.5 +0.2	93.8 -1.9	usable		+
Faital PRO 10PR300	65 -5	0.48 -0.13	30.6 -2.4	4.92 +1.62	97 +1.3	usable	16 Ω vs 8 Ω: amp load changes	+
Wharfedale D-002	71.3 +1.3	0.624 +0.02	50.8 +17.8	4 +0.7	98.2 +2.5	usable		+

Compare the closest 3 against the BL 10-100 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.