Cabasse 30BZ24 vp oriu1
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 16 Ω |
| Fs | 30.3 Hz |
| Qts | 0.394 |
| Qes | 0.42 |
| Qms | 6.25 |
| Vas | 363 L |
| Sd | 530 cm² |
| Xmax | 4 mm |
| Re | 10.5 Ω |
| Bl | 11.9 T·m |
| Mms | 29.9 g |
| Pe | 80 W |
| Sensitivity | 94.6 dB |
Alignment hint
| EBP | 72 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 163.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Davis 31TK12-M vp | 27.8 -2.5 | 0.416 +0.02 | 376 +13 | 5 +1 | 94.5 -0.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion T1600 vp 2 | 30.3 = | 0.44 +0.05 | 264.7 -98.3 | 4 = | 94.3 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Sphynx SP-W12 | 28 -2.3 | 0.415 +0.02 | 258 -105 | 4 = | 93.9 -0.7 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Sphynx SP-W12-BK | 28 -2.3 | 0.417 +0.02 | 258 -105 | 4 = | 93.9 -0.7 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Siare 31C | 23.3 -7 | 0.358 -0.04 | 356.7 -6.3 | 4 = | 92.6 -2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Ciare HW320 | 27 -3.3 | 0.445 +0.05 | 293 -70 | 4.1 +0.1 | 93.4 -1.2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| SEAS 33F-WB | 27 -3.3 | 0.348 -0.05 | 280 -83 | 5 +1 | 94.6 = | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion T1600 vp 1 | 23.6 -6.7 | 0.463 +0.07 | 350 -13 | 4 = | 92.2 -2.4 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Philips AD12250W8 vp doum1 | 29.5 -0.8 | 0.404 +0.01 | 216 -147 | 6 +2 | 93.2 -1.4 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| SEAS 33F-WK MH | 21.6 -8.7 | 0.383 -0.01 | 327.7 -35.3 | 5 +1 | 92.1 -2.5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the 30BZ24 vp oriu1 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.