← all drivers

Brax BRAX MATRIX ML10

10" · 4 Ω · 600 W · 87.3 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs35 Hz
Qts0.46
Qes0.49
Qms8.1
Vas40 L
Sd346 cm²
Xmax12.5 mm
Re3.4 Ω
Bl11.6 T·m
Mms89 g
Pe600 W
Sensitivity87.3 dB

Alignment hint

EBP71 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 29.3 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Brax MATRIX 10.135.8 +0.80.53 +0.0735.34 -4.6612.5 =86.5 -0.8close+
Beyma 10NMFS35 =0.42 -0.0445 +514.5 +290 +2.7close8 Ω vs 4 Ω: amp load changes · 350 W vs 600 W: lower power handling+
Morel UW 105833 -20.434 -0.0340.6 +0.68.9 -3.686.7 -0.6close8 Ω vs 4 Ω: amp load changes · Xmax 8.9 mm < 12.5 mm: lower excursion-limited SPL+
Alpine SWA-10S432 -30.42 -0.0441 +110 -2.586.6 -0.7close250 W vs 600 W: lower power handling · Xmax 10 mm < 12.5 mm: lower excursion-limited SPL+
JL Audio 10W3V3-233 -20.495 +0.0332.17 -7.8314 +1.585.37 -1.93usable2 Ω vs 4 Ω: amp load changes+
HSU Research VTF-2 1038.4 +3.40.45 -0.0138.51 -1.498 -4.588.4 +1.1usable200 W vs 600 W: lower power handling · Xmax 8 mm < 12.5 mm: lower excursion-limited SPL+
JL Audio 10W3V3-431.5 -3.50.485 +0.0232.23 -7.7714 +1.584.87 -2.43usable+
Infinity KAPPA PERFECT 10.128.35 -6.650.42 -0.0438.511 -1.4914.15 +1.6584.8 -2.5usable350 W vs 600 W: lower power handling+
Infinity REFERENCE 1060W29 -60.42 -0.0432.9 -7.113.0048 +0.588 +0.7usable275 W vs 600 W: lower power handling+
Kenwood KFC-W250935 =0.42 -0.0444 +48 -4.588.2 +0.9usable175 W vs 600 W: lower power handling · Xmax 8 mm < 12.5 mm: lower excursion-limited SPL+

Compare the closest 3 against the BRAX MATRIX ML10 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.