← all drivers

BMS 5S117

5" · 16 Ω · 130 W · 91 dB

Thiele-Small parameters

Nominal size5"
Impedance16 Ω
Fs95 Hz
Qts0.42
Qes0.49
Qms3.3
Vas3.25 L
Sd85 cm²
Xmax5 mm
Re11.4 Ω
Bl11.3 T·m
Mms8.9 g
Pe130 W
Sensitivity91 dB

Alignment hint

EBP194 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 1.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
BMS 5N160113 +180.43 +0.012.57 -0.685 =91 =close+
Faital PRO 5PR16090 -50.31 -0.113.7 +0.455.1 +0.192 +1usable8 Ω vs 16 Ω: amp load changes+
B&C 5NDL3880 -150.36 -0.064.3 +1.053.5 -1.591 =usable8 Ω vs 16 Ω: amp load changes · 90 W vs 130 W: lower power handling · Xmax 3.5 mm < 5 mm: lower excursion-limited SPL+
LaVoce WSF051.02106 +110.6 +0.183.26 +0.013.1 -1.991.5 +0.5usable8 Ω vs 16 Ω: amp load changes · 60 W vs 130 W: lower power handling · Xmax 3.1 mm < 5 mm: lower excursion-limited SPL+
Sica 5 N 1.5 PL110.6 +15.60.56 +0.143 -0.253 -291 =usable8 Ω vs 16 Ω: amp load changes · Xmax 3 mm < 5 mm: lower excursion-limited SPL+
Faital PRO 5FE12065 -300.38 -0.045 +1.755.2 +0.288 -3usable4 Ω vs 16 Ω: amp load changes · 80 W vs 130 W: lower power handling+
Eminence ALPHA 5-887 -80.54 +0.126.14 +2.895.92 +0.9289.4 -1.6usable8 Ω vs 16 Ω: amp load changes+
LaVoce WSF051.02-1698 +30.66 +0.244.02 +0.773.2 -1.890.5 -0.5usable60 W vs 130 W: lower power handling · Xmax 3.2 mm < 5 mm: lower excursion-limited SPL+
Faital PRO 5FE10065 -300.45 +0.035.7 +2.455.25 +0.2588 -3usable8 Ω vs 16 Ω: amp load changes · 80 W vs 130 W: lower power handling+
Faital PRO 5FE10565 -300.45 +0.035.7 +2.455.25 +0.2588 -3usable8 Ω vs 16 Ω: amp load changes · 80 W vs 130 W: lower power handling+

Compare the closest 3 against the 5S117 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.