BMS 15N840V2-8
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35.6 Hz |
| Qts | 0.268 |
| Qes | 0.28 |
| Qms | 6.26 |
| Vas | 130 L |
| Sd | 845 cm² |
| Xmax | 8.7 mm |
| Re | 5 Ω |
| Bl | 24.8 T·m |
| Mms | 153.9 g |
| Pe | 1200 W |
| Sensitivity | 97.2 dB |
Alignment hint
| EBP | 127 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 21.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PHL Audio 6201MNd | 36 +0.4 | 0.266 = | 138.4 +8.4 | 7.9 -0.8 | 97.3 +0.1 | close | Xmax 7.9 mm < 8.7 mm: lower excursion-limited SPL | + |
| Faital PRO 15FX600 | 38 +2.4 | 0.27 = | 128.3 -1.7 | 11.25 +2.55 | 98 +0.8 | close | 700 W vs 1200 W: lower power handling | + |
| B&C 15NBX100 | 36 +0.4 | 0.29 +0.02 | 125 -5 | 10 +1.3 | 97 -0.2 | close | + | |
| RCF LF15G401 | 36 +0.4 | 0.26 -0.01 | 150 +20 | 9 +0.3 | 97 -0.2 | close | 800 W vs 1200 W: lower power handling | + |
| RCF LF15Y408 | 36 +0.4 | 0.26 -0.01 | 150 +20 | 9 +0.3 | 97 -0.2 | close | 800 W vs 1200 W: lower power handling | + |
| BMS 15S435 | 38 +2.4 | 0.28 +0.01 | 129 -1 | 8 -0.7 | 97 -0.2 | close | Xmax 8 mm < 8.7 mm: lower excursion-limited SPL | + |
| PHL Audio 6090 | 35 -0.6 | 0.265 = | 145 +15 | 7.9 -0.8 | 97 -0.2 | close | Xmax 7.9 mm < 8.7 mm: lower excursion-limited SPL | + |
| 18 Sound 15NLW9401 | 39 +3.4 | 0.26 -0.01 | 134 +4 | 10 +1.3 | 97.5 +0.3 | close | + | |
| 18 Sound 15LW1401 | 39 +3.4 | 0.26 -0.01 | 127 -3 | 9 +0.3 | 98 +0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 15HP1020 | 40 +4.4 | 0.27 = | 126.6 -3.4 | 9 +0.3 | 98 +0.8 | close | 700 W vs 1200 W: lower power handling | + |
Compare the closest 3 against the 15N840V2-8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.