BMS 15N820
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 39.2 Hz |
| Qts | 0.26 |
| Qes | 0.27 |
| Qms | 4.5 |
| Vas | 159 L |
| Sd | 880 cm² |
| Xmax | 4.5 mm |
| Re | 5.7 Ω |
| Bl | 24.2 T·m |
| Mms | 114 g |
| Pe | 900 W |
| Sensitivity | 98 dB |
Alignment hint
| EBP | 145 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 24.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| BMS 15N820 v2015 | 39.2 = | 0.255 -0.01 | 159 = | 5 +0.5 | 99 +1 | close | + | |
| P.Audio C15-500LF | 39 -0.2 | 0.261 = | 165 +6 | 5 +0.5 | 99.3 +1.3 | close | 500 W vs 900 W: lower power handling | + |
| BMS 15S320 | 41 +1.8 | 0.28 +0.02 | 154 -5 | 4.5 = | 98 = | close | 500 W vs 900 W: lower power handling | + |
| McCauley 6244 | 40 +0.8 | 0.272 +0.01 | 144.4 -14.6 | 4.6 +0.1 | 98.4 +0.4 | close | 400 W vs 900 W: lower power handling | + |
| SICA 15 K3 PL-8 | 40 +0.8 | 0.27 +0.01 | 166.1 +7.1 | 6.5 +2 | 97.6 -0.4 | close | 400 W vs 900 W: lower power handling | + |
| B&C 15 PS 76 | 38 -1.2 | 0.266 +0.01 | 164 +5 | 6.3 +1.8 | 98.9 +0.9 | close | 550 W vs 900 W: lower power handling | + |
| B&C 15PS76-8 | 38 -1.2 | 0.26 = | 164 +5 | 7.5 +3 | 99 +1 | close | 550 W vs 900 W: lower power handling | + |
| PD PD 152 | 40 +0.8 | 0.266 +0.01 | 170 +11 | 5.1 +0.6 | 99.3 +1.3 | close | 400 W vs 900 W: lower power handling | + |
| Precision Devices PD 152 | 40 +0.8 | 0.266 +0.01 | 170 +11 | 5.1 +0.6 | 99.3 +1.3 | close | 400 W vs 900 W: lower power handling | + |
| BMS 15N830V2 | 39.5 +0.3 | 0.27 +0.01 | 159 = | 8 +3.5 | 97.1 -0.9 | close | 6 Ω vs 8 Ω: amp load changes · 550 W vs 900 W: lower power handling | + |
Compare the closest 3 against the 15N820 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.