BMS 15N620-4
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 39.8 Hz |
| Qts | 0.313 |
| Qes | 0.33 |
| Qms | 6.05 |
| Vas | 144.8 L |
| Sd | 870 cm² |
| Xmax | 5.5 mm |
| Re | 2.9 Ω |
| Bl | 16 T·m |
| Mms | 117.2 g |
| Pe | 500 W |
| Sensitivity | 100.8 dB |
Alignment hint
| EBP | 121 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 35.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| BMS 15N620-8 | 40 +0.2 | 0.313 = | 144.8 = | 5.5 = | 97.8 -3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH500 vp1 | 40 +0.2 | 0.328 +0.02 | 146.1 +1.3 | 6.7 +1.2 | 98.4 -2.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH520-4 v2021 | 38 -1.8 | 0.337 +0.02 | 146.2 +1.4 | 7.4 +1.9 | 100.3 -0.5 | close | + | |
| SB Audience BIANCO-15MW500 | 39 -0.8 | 0.307 -0.01 | 139.4 -5.4 | 5.9 +0.4 | 97.7 -3.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH500 vp2 | 40 +0.2 | 0.335 +0.02 | 146.9 +2.1 | 6.7 +1.2 | 98.3 -2.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 15NTLW2500 | 45 +5.2 | 0.3 -0.01 | 143 -1.8 | 8 +2.5 | 100.5 -0.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH520-4 | 38 -1.8 | 0.337 +0.02 | 156.6 +11.8 | 7.8 +2.3 | 100.6 -0.2 | close | + | |
| Sica 15 Fe 3 CP | 40.2 +0.4 | 0.33 +0.02 | 170.4 +25.6 | 5.5 = | 99.4 -1.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Fane FC-154F01 | 41 +1.2 | 0.287 -0.03 | 151 +6.2 | 6.5 +1 | 99.1 -1.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
| BMS 15S330 | 39 -0.8 | 0.32 +0.01 | 152 +7.2 | 8 +2.5 | 98 -2.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 15N620-4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.