Beyma SM118/N vp PP
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 36 Hz |
| Qts | 0.492 |
| Qes | 0.53 |
| Qms | 6.83 |
| Vas | 150 L |
| Sd | 1150 cm² |
| Xmax | 5.4 mm |
| Re | 3.2 Ω |
| Bl | 18.2 T·m |
| Mms | 241.6 g |
| Pe | 400 W |
| Sensitivity | 97.2 dB |
Alignment hint
| EBP | 68 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 140.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce SAF184.04 | 37 +1 | 0.474 -0.02 | 143 -7 | 9.3 +3.9 | 95.2 -2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 18FH1042 | 38 +2 | 0.413 -0.08 | 150 = | 5.6 +0.2 | 96.4 -0.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| LaVoce SAF184.02 | 38 +2 | 0.422 -0.07 | 150 = | 8.1 +2.7 | 96.9 -0.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| SB Audience ROSSO-18SW1000D | 35 -1 | 0.467 -0.02 | 164.3 +14.3 | 8.2 +2.8 | 95.3 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Sica 18 PF 4 | 38 +2 | 0.43 -0.06 | 147.3 -2.7 | 8 +2.6 | 96.3 -0.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| LaVoce SAN184.02 | 38 +2 | 0.406 -0.09 | 150 = | 7.9 +2.5 | 96.8 -0.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| P.Audio BM-18LF | 39.8 +3.8 | 0.432 -0.06 | 169.9 +19.9 | 5.8 +0.4 | 97.7 +0.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| LaVoce SAN184.03 | 36 = | 0.417 -0.08 | 160 +10 | 9.4 +4 | 95.9 -1.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Selenium 18SW2P | 36 = | 0.419 -0.07 | 179 +29 | 6.5 +1.1 | 96.4 -0.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| DAS Audio 18SX | 39.2 +3.2 | 0.443 -0.05 | 171.9 +21.9 | 8 +2.6 | 96.4 -0.8 | usable | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the SM118/N vp PP →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.