Beyma SM115 vp2
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35.4 Hz |
| Qts | 0.365 |
| Qes | 0.4 |
| Qms | 4.17 |
| Vas | 295.8 L |
| Sd | 881.4 cm² |
| Xmax | 7.3 mm |
| Re | 6.2 Ω |
| Bl | 16 T·m |
| Mms | 74.5 g |
| Pe | 400 W |
| Sensitivity | 98.2 dB |
Alignment hint
| EBP | 88 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 107.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma SM115 vp1 | 35.9 +0.5 | 0.355 -0.01 | 314.2 +18.4 | 7.3 = | 98.5 +0.3 | close | + | |
| Beyma SM115 vp3 | 35 -0.4 | 0.335 -0.03 | 282.9 -12.9 | 7.3 = | 97.9 -0.3 | close | + | |
| Beyma SM115 vp4 | 35.5 +0.1 | 0.339 -0.03 | 310.6 +14.8 | 7.3 = | 99 +0.8 | close | + | |
| Beyma SM115/N 8 ohms | 35 -0.4 | 0.382 +0.02 | 267 -28.8 | 7.3 = | 97.5 -0.7 | close | + | |
| Beyma SM115/N v2015 | 35 -0.4 | 0.382 +0.02 | 267 -28.8 | 7.3 = | 97.5 -0.7 | close | + | |
| Beyma SM115 v2 | 35 -0.4 | 0.315 -0.05 | 276 -19.8 | 7.3 = | 98.4 +0.2 | close | + | |
| Focal 38WX4 | 28.9 -6.5 | 0.364 = | 310.4 +14.6 | 7.7 +0.4 | 99.2 +1 | close | 4 Ω vs 8 Ω: amp load changes · 225 W vs 400 W: lower power handling | + |
| AE Speakers TD15M | 34.7 -0.7 | 0.327 -0.04 | 312 +16.2 | 6 -1.3 | 98.5 +0.3 | close | 250 W vs 400 W: lower power handling · Xmax 6 mm < 7.3 mm: lower excursion-limited SPL | + |
| AE Speakers TD15M 8 Ohms | 34.7 -0.7 | 0.327 -0.04 | 312 +16.2 | 6 -1.3 | 98.5 +0.3 | close | 250 W vs 400 W: lower power handling · Xmax 6 mm < 7.3 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN 15-600LF | 37 +1.6 | 0.388 +0.02 | 236 -59.8 | 6.9 -0.4 | 98.3 +0.1 | close | Xmax 6.9 mm < 7.3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the SM115 vp2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.