Beyma SM112 vp
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 57.8 Hz |
| Qts | 0.391 |
| Qes | 0.412 |
| Qms | 7.65 |
| Vas | 64.6 L |
| Sd | 550 cm² |
| Xmax | 4.2 mm |
| Re | 6.41 Ω |
| Bl | 16.8 T·m |
| Mms | 49.8 g |
| Pe | 250 W |
| Sensitivity | 97.7 dB |
Alignment hint
| EBP | 140 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 28.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 12PR310-8 | 54 -3.8 | 0.396 +0.01 | 62.8 -1.8 | 4.9 +0.7 | 97.5 -0.2 | close | + | |
| Fane COLOSSUS 12MBN | 55 -2.8 | 0.396 +0.01 | 63 -1.6 | 5.5 +1.3 | 97.4 -0.3 | close | + | |
| Faital PRO 12HX500 | 54 -3.8 | 0.396 +0.01 | 62.3 -2.3 | 5.5 +1.3 | 97.2 -0.5 | close | + | |
| Fertin Acoustics LB 31 SONO | 59.5 +1.7 | 0.407 +0.02 | 70 +5.4 | 4 -0.2 | 97.5 -0.2 | close | Xmax 4 mm < 4.2 mm: lower excursion-limited SPL | + |
| RCF L 12/568H | 58 +0.2 | 0.409 +0.02 | 72 +7.4 | 4 -0.2 | 98.1 +0.4 | close | Xmax 4 mm < 4.2 mm: lower excursion-limited SPL | + |
| LaVoce WSN122.50-16 | 53 -4.8 | 0.4 +0.01 | 65.84 +1.24 | 4.6 +0.4 | 96.5 -1.2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| RCF L12/568H | 58.8 +1 | 0.41 +0.02 | 72 +7.4 | 4 -0.2 | 97.1 -0.6 | close | 100 W vs 250 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL | + |
| Faital PRO 12PR300-4 | 50 -7.8 | 0.392 = | 63.1 -1.5 | 4.9 +0.7 | 98.8 +1.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 12PR300-8 | 54 -3.8 | 0.382 -0.01 | 73.5 +8.9 | 4.9 +0.7 | 98.2 +0.5 | close | + | |
| Beyma 12MC500 | 57 -0.8 | 0.373 -0.02 | 54.9 -9.7 | 5.5 +1.3 | 97.8 +0.1 | close | + |
Compare the closest 3 against the SM112 vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.