Beyma SM112/N vp1
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 37 Hz |
| Qts | 0.433 |
| Qes | 0.494 |
| Qms | 3.524 |
| Vas | 90 L |
| Sd | 550 cm² |
| Xmax | 7.3 mm |
| Re | 6.2 Ω |
| Bl | 15.9 T·m |
| Mms | 87.2 g |
| Pe | 400 W |
| Sensitivity | 92.7 dB |
Alignment hint
| EBP | 75 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 54 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SICA SAMPLE 7161 | 35.2 -1.8 | 0.437 = | 79.6 -10.4 | 8 +0.7 | 91.7 -1 | close | + | |
| Ciare HSB322-22 | 35 -2 | 0.42 -0.01 | 83 -7 | 7.5 +0.2 | 95 +2.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma SM112/N v2012 | 43 +6 | 0.434 = | 94 +4 | 7.3 = | 95.3 +2.6 | close | + | |
| McCauley 6232 | 35 -2 | 0.411 -0.02 | 106.2 +16.2 | 8.4 +1.1 | 93.6 +0.9 | close | + | |
| Magnat POWER BULL 300 | 33 -4 | 0.479 +0.05 | 82 -8 | 8.1 +0.8 | 93 +0.3 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling | + |
| GRS 12PT-8 | 35 -2 | 0.387 -0.05 | 112 +22 | 7.8 +0.5 | 93 +0.3 | close | + | |
| RCF W 300 | 39.5 +2.5 | 0.391 -0.04 | 90 = | 6.9 -0.4 | 96.4 +3.7 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling · Xmax 6.9 mm < 7.3 mm: lower excursion-limited SPL | + |
| Kartesian WOM300_vDIY | 37 = | 0.362 -0.07 | 91.7 +1.7 | 6.4 -0.9 | 94.6 +1.9 | close | 250 W vs 400 W: lower power handling · Xmax 6.4 mm < 7.3 mm: lower excursion-limited SPL | + |
| MCM Electronics 55-2982 | 36.2 -0.8 | 0.407 -0.03 | 121.7 +31.7 | 7 -0.3 | 93.9 +1.2 | usable | Xmax 7 mm < 7.3 mm: lower excursion-limited SPL | + |
| Sica 12 SR 3 CP | 37 = | 0.4 -0.03 | 60.9 -29.1 | 8 +0.7 | 92.2 -0.5 | usable | + |
Compare the closest 3 against the SM112/N vp1 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.