Beyma PRO CM10

10" · 8 Ω · 125 W · 95.3 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	60 Hz
Qts	0.594
Qes	0.64
Qms	8.33
Vas	49.6 L
Sd	390 cm²
Xmax	4.2 mm
Re	6.2 Ω
Bl	10.5 T·m
Mms	30.2 g
Pe	125 W
Sensitivity	95.3 dB

Alignment hint

EBP	94 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 118.9 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Fane SOVEREIGN 10-125 v2	55 -5	0.638 +0.04	50 +0.4	4.6 +0.4	93.5 -1.8	close		+
Ciare HX255 GR vp	55.3 -4.7	0.569 -0.03	57.4 +7.8	4 -0.2	95.4 +0.1	close	Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
Fane 10-125	55 -5	0.638 +0.04	50.6 +1	4.7 +0.5	93.6 -1.7	close		+
Fenton PS10F vp	60.1 +0.1	0.586 -0.01	41.2 -8.4	4 -0.2	93.3 -2	close	16 Ω vs 8 Ω: amp load changes · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
LaVoce NBASS10-20-32	57 -3	0.61 +0.02	44.44 -5.16	6.4 +2.2	94 -1.3	close	32 Ω vs 8 Ω: amp load changes	+
Faital PRO 10FE200 v2014	55 -5	0.695 +0.1	53.4 +3.8	4.7 +0.5	94.1 -1.2	close		+
Wharfedale D-002	71.3 +11.3	0.624 +0.03	50.8 +1.2	4 -0.2	98.2 +2.9	close	Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
Fenton NS10X	67.5 +7.5	0.563 -0.03	40.2 -9.4	3.8 -0.4	95.6 +0.3	usable	Xmax 3.8 mm < 4.2 mm: lower excursion-limited SPL	+
Faital PRO 10FE300	50 -10	0.52 -0.07	50.5 +0.9	5.52 +1.32	96 +0.7	usable		+
Siemens C 71233-4A-A1	70.2 +10.2	0.546 -0.05	58.6 +9	4 -0.2	95.1 -0.2	usable	16 Ω vs 8 Ω: amp load changes · 80 W vs 125 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+

Compare the closest 3 against the PRO CM10 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.