Beyma HP15
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 28 Hz |
| Qts | 0.392 |
| Qes | 0.46 |
| Qms | 2.66 |
| Vas | 500 L |
| Sd | 855 cm² |
| Xmax | 5 mm |
| Re | 6.8 Ω |
| Bl | 13.1 T·m |
| Mms | 66.2 g |
| Pe | 200 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 61 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 221.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Hyper Phase HP15-8 | 28 = | 0.392 = | 500 = | 5 = | 96.5 = | close | 150 W vs 200 W: lower power handling | + |
| Supravox 400 GMF | 26 -2 | 0.319 -0.07 | 489 -11 | 5 = | 97 +0.5 | close | 120 W vs 200 W: lower power handling | + |
| AE Speakers TD15S-4 Ohms | 22.8 -5.2 | 0.371 -0.02 | 467 -33 | 7 +2 | 96.9 +0.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| AE Speakers TD15S-4ohm | 22.8 -5.2 | 0.371 -0.02 | 467 -33 | 7 +2 | 96.9 +0.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Supravox 400-2000EXC_09V | 25 -3 | 0.431 +0.04 | 440 -60 | 5 = | 94.8 -1.7 | close | 120 W vs 200 W: lower power handling | + |
| AE Speakers TD15S | 22.8 -5.2 | 0.371 -0.02 | 467 -33 | 7 +2 | 95.1 -1.4 | usable | + | |
| JBL 2216ND-1 | 27.6 -0.4 | 0.357 -0.04 | 378.4 -121.6 | 9.5 +4.5 | 96.8 +0.3 | usable | + | |
| ATC PA100-375 STD | 26 -2 | 0.377 -0.02 | 358 -142 | 5.6 +0.6 | 95.1 -1.4 | usable | 100 W vs 200 W: lower power handling | + |
| JBL 2216ND (pour JBL 4367) | 28.3 +0.3 | 0.376 -0.02 | 333 -167 | 9.5 +4.5 | 96.3 -0.2 | usable | + | |
| Crites Speakers CW1526 V2017 | 26.3 -1.7 | 0.346 -0.05 | 437.2 -62.8 | 7.2 +2.2 | 99.1 +2.6 | usable | 4 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling | + |
Compare the closest 3 against the HP15 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.