Beyma HP10
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 61 Hz |
| Qts | 1.057 |
| Qes | 1.3 |
| Qms | 5.65 |
| Vas | 51 L |
| Sd | 360 cm² |
| Xmax | 3.1 mm |
| Re | 7 Ω |
| Bl | 7.1 T·m |
| Mms | 24.2 g |
| Pe | 100 W |
| Sensitivity | 92.1 dB |
Alignment hint
| EBP | 47 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Visaton W250 vp | 55.6 -5.4 | 1.045 -0.01 | 58.1 +7.1 | 3.4 +0.3 | 91.9 -0.2 | close | + | |
| Fenton PS10 vp2 | 59.9 -1.1 | 1.01 -0.05 | 41.2 -9.8 | 3.2 +0.1 | 90.4 -1.7 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Skytronic SP 1000 | 52 -9 | 1.064 +0.01 | 51.6 +0.6 | 6 +2.9 | 90.6 -1.5 | close | + | |
| Goldwood GW-210/4 | 41.8 -19.2 | 1.067 +0.01 | 64.2 +13.2 | 3.5 +0.4 | 90.7 -1.4 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Focal 10C 5401 | 56.5 -4.5 | 0.796 -0.26 | 43.1 -7.9 | 3.2 +0.1 | 94.6 +2.5 | usable | 4 Ω vs 8 Ω: amp load changes · 60 W vs 100 W: lower power handling | + |
| Eltax MILLENIUM 500 GRAVE vp | 54.6 -6.4 | 0.95 -0.11 | 38 -13 | 4.4 +1.3 | 88.7 -3.4 | usable | + | |
| Fonestar FPW 250 | 55 -6 | 0.825 -0.23 | 38 -13 | 3.9 +0.8 | 90.6 -1.5 | usable | + | |
| Fenton PS10 | 60 -1 | 0.684 -0.37 | 41.2 -9.8 | 4 +0.9 | 93.1 +1 | usable | + | |
| Focal 10V1 | 49.7 -11.3 | 0.822 -0.23 | 42.5 -8.5 | 4.9 +1.8 | 93.7 +1.6 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FE200 v2014 | 55 -6 | 0.695 -0.36 | 53.4 +2.4 | 4.7 +1.6 | 94.1 +2 | usable | + |
Compare the closest 3 against the HP10 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.