Beyma CM-10
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 61 Hz |
| Qts | 0.506 |
| Qes | 0.55 |
| Qms | 6.38 |
| Vas | 40.7 L |
| Sd | 390 cm² |
| Xmax | 3.6 mm |
| Re | 6.15 Ω |
| Bl | 12.4 T·m |
| Mms | 35.7 g |
| Pe | 125 W |
| Sensitivity | 95.4 dB |
Alignment hint
| EBP | 111 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 42.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Monacor SPA-110PA | 61 = | 0.469 -0.04 | 38 -2.7 | 4 +0.4 | 96.3 +0.9 | close | + | |
| Hyper Phase CM10 | 65 +4 | 0.511 +0.01 | 45 +4.3 | 3.3 -0.3 | 95.6 +0.2 | close | Xmax 3.3 mm < 3.6 mm: lower excursion-limited SPL | + |
| Fenton NS10X | 67.5 +6.5 | 0.563 +0.06 | 40.2 -0.5 | 3.8 +0.2 | 95.6 +0.2 | close | + | |
| Faital PRO 10FE400 | 60 -1 | 0.47 -0.04 | 35.3 -5.4 | 5.42 +1.82 | 96 +0.6 | close | + | |
| Fenton PS10F vp | 60.1 -0.9 | 0.586 +0.08 | 41.2 +0.5 | 4 +0.4 | 93.3 -2.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Eminence BASSLITE CH2010 | 58 -3 | 0.438 -0.07 | 43 +2.3 | 3.5 -0.1 | 96.2 +0.8 | close | Xmax 3.5 mm < 3.6 mm: lower excursion-limited SPL | + |
| Audax PR24LXT100 | 63 +2 | 0.474 -0.03 | 46 +5.3 | 3 -0.6 | 95.5 +0.1 | close | Xmax 3 mm < 3.6 mm: lower excursion-limited SPL | + |
| Ciare CMI 250 ND | 59 -2 | 0.496 -0.01 | 34 -6.7 | 4.5 +0.9 | 97.5 +2.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Celestion K10-200E | 67 +6 | 0.471 -0.04 | 37 -3.7 | 4 +0.4 | 97.3 +1.9 | close | + | |
| Radian CRS1030 | 65 +4 | 0.472 -0.03 | 35.3 -5.4 | 5.5 +1.9 | 96.2 +0.8 | close | + |
Compare the closest 3 against the CM-10 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.