Beyma CD-320Nd/Ti
Compression driver specs
| Throat exit | 2" |
|---|---|
| Voice coil | 76.2 mm |
| Impedance | 8 Ω |
| Usable range | 500-18000 Hz |
| Min crossover | 800 Hz |
| Sensitivity (on horn) | 110 dB |
| Magnet | neodymium |
| Weight | 2 kg |
| Power (AES) | 130 W |
Compatible horns (same exit)
- B&C ME60 · 60°×40°
- Beyma TD-460/N · 60°×40°
- BMS 2230 · 90°×55°
- BMS 2236 · 60°×40°
Matched on throat exit (2") only. Verify mounting and crossover against both datasheets.
Substitute candidates
| Driver | Min XO (Hz) | Range low (Hz) | Range high (Hz) | Voice coil (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma CD-320Fe/Ti | 800 = | 500 = | 18000 = | 76.2 = | 110 = | close | + | |
| 18 Sound ND2060A | 800 = | 500 = | 20000 +2000 | 75 -1.2 | 110 = | close | 16 Ω vs 8 Ω: amp load changes · 80 W vs 130 W: lower power handling | + |
| 18 Sound ND2060A | 800 = | 500 = | 20000 +2000 | 75 -1.2 | 110 = | close | 80 W vs 130 W: lower power handling | + |
| 18 Sound ND2080 | 800 = | 500 = | 20000 +2000 | 75 -1.2 | 110 = | close | 16 Ω vs 8 Ω: amp load changes · 100 W vs 130 W: lower power handling | + |
| 18 Sound ND2080 | 800 = | 500 = | 20000 +2000 | 75 -1.2 | 110 = | close | 100 W vs 130 W: lower power handling | + |
| B&C DE750TN | 800 = | 500 = | 18000 = | 75 -1.2 | 109 -1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Beyma SMC/60 | 800 = | 500 = | 18000 = | 72.4 -3.8 | 109 -1 | close | 80 W vs 130 W: lower power handling | + |
| Radian 760 | 700 -100 | 500 = | 18000 = | 76.2 = | 111 +1 | close | 16 Ω vs 8 Ω: amp load changes · 100 W vs 130 W: lower power handling | + |
| Radian 760 | 700 -100 | 500 = | 18000 = | 76.2 = | 111 +1 | close | 100 W vs 130 W: lower power handling | + |
| 18 Sound HD2080T | 800 = | 500 = | 20000 +2000 | 75 -1.2 | 109 -1 | close | 100 W vs 130 W: lower power handling | + |
Compare the closest 3 against the CD-320Nd/Ti →
Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.