Beyma 8"G40
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 70 Hz |
| Qts | 0.36 |
| Qes | 0.38 |
| Qms | 6.8 |
| Vas | 17 L |
| Sd | 220 cm² |
| Xmax | 6.5 mm |
| Re | 6.1 Ω |
| Mms | 21 g |
| Pe | 250 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 184 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 8MB500 | 73 +3 | 0.36 = | 18.4 +1.4 | 6 -0.5 | 95 = | close | 4 Ω vs 8 Ω: amp load changes · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| Faital PRO 8PR200 | 58 -12 | 0.37 +0.01 | 16.9 -0.1 | 8.15 +1.65 | 95 = | close | + | |
| Faital PRO 8PR210 | 65 -5 | 0.34 -0.02 | 15.7 -1.3 | 7.17 +0.67 | 94 -1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 8NDL51 | 66 -4 | 0.37 +0.01 | 14 -3 | 7 +0.5 | 94 -1 | close | + | |
| Faital PRO 8FE300 | 70 = | 0.44 +0.08 | 15.7 -1.3 | 5.52 -0.98 | 95 = | close | Xmax 5.52 mm < 6.5 mm: lower excursion-limited SPL | + |
| Oberton 8MB201 | 67.7 -2.3 | 0.314 -0.05 | 14.74 -2.26 | 7 +0.5 | 93 -2 | close | + | |
| B&C 8FMB51 | 68 -2 | 0.39 +0.03 | 20.5 +3.5 | 5.5 -1 | 96 +1 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 5.5 mm < 6.5 mm: lower excursion-limited SPL | + |
| Faital PRO 8PR210 | 65 -5 | 0.29 -0.07 | 15.4 -1.6 | 6.92 +0.42 | 95 = | usable | + | |
| Sica 8 Fe 2 CP | 67 -3 | 0.32 -0.04 | 16.9 -0.1 | 4.5 -2 | 94.6 -0.4 | usable | Xmax 4.5 mm < 6.5 mm: lower excursion-limited SPL | + |
| B&C 8MBX51 | 68 -2 | 0.38 +0.02 | 22 +5 | 6 -0.5 | 97 +2 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 8"G40 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.