Beyma 8"BR40/N
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.39 |
| Qes | 0.48 |
| Qms | 2.1 |
| Vas | 89.1 L |
| Sd | 220 cm² |
| Xmax | 6.7 mm |
| Re | 5.5 Ω |
| Bl | 6.8 T·m |
| Mms | 21 g |
| Pe | 50 W |
| Sensitivity | 91 dB |
Alignment hint
| EBP | 63 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 39 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sica 8 H 2 CP | 39.1 +9.1 | 0.43 +0.04 | 35.9 -53.2 | 6.5 -0.2 | 89.7 -1.3 | risky | Xmax 6.5 mm < 6.7 mm: lower excursion-limited SPL | + |
| Beyma 8NMFW | 37 +7 | 0.34 -0.05 | 27 -62.1 | 9 +2.3 | 90 -1 | risky | + | |
| Faital PRO 8RS340 | 42 +12 | 0.34 -0.05 | 25.5 -63.6 | 7.33 +0.63 | 91 = | risky | + | |
| Faital PRO 8RS350 | 42 +12 | 0.3 -0.09 | 23.7 -65.4 | 7.37 +0.67 | 90 -1 | risky | + | |
| B&C 8BG51 | 52 +22 | 0.4 +0.01 | 18 -71.1 | 6.5 -0.2 | 92 +1 | risky | Xmax 6.5 mm < 6.7 mm: lower excursion-limited SPL | + |
| 18 Sound 8NTLS2000 | 43 +13 | 0.24 -0.15 | 30 -59.1 | 7.4 +0.7 | 93.5 +2.5 | risky | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 8NTLS2000 | 42 +12 | 0.24 -0.15 | 28 -61.1 | 7.4 +0.7 | 93 +2 | risky | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce FBASS08-18 | 53 +23 | 0.4 +0.01 | 23.64 -65.46 | 4.5 -2.2 | 92.5 +1.5 | risky | Xmax 4.5 mm < 6.7 mm: lower excursion-limited SPL | + |
| B&C 8FG51 | 49 +19 | 0.32 -0.07 | 20 -69.1 | 6.5 -0.2 | 93 +2 | risky | Xmax 6.5 mm < 6.7 mm: lower excursion-limited SPL | + |
| 18 Sound 8NMB420 | 59 +29 | 0.31 -0.08 | 31 -58.1 | 5.8 -0.9 | 95 +4 | risky | 4 Ω vs 8 Ω: amp load changes · Xmax 5.8 mm < 6.7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 8"BR40/N →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.