Beyma 6P200Fe

6.5" · 16 Ω · 200 W · 93 dB · datasheet ↗

Thiele-Small parameters

Nominal size	6.5"
Impedance	16 Ω
Fs	66 Hz
Qts	0.35
Qes	0.38
Qms	4.3
Vas	8.8 L
Sd	135 cm²
Xmax	4 mm
Re	9.9 Ω
Bl	13.6 T·m
Mms	16 g
Pe	200 W
Sensitivity	93 dB

Alignment hint

EBP	174 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 2.9 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
B&C 6PS44	71 +5	0.33 -0.02	7 -1.8	4.5 +0.5	93 =	close	8 Ω vs 16 Ω: amp load changes	+
Oberton 6NB150	62.32 -3.68	0.28 -0.07	9.3 +0.5	5.5 +1.5	92 -1	usable	8 Ω vs 16 Ω: amp load changes · 150 W vs 200 W: lower power handling	+
B&C 6PS38	75 +9	0.3 -0.05	8 -0.8	6 +2	94 +1	usable	8 Ω vs 16 Ω: amp load changes · 150 W vs 200 W: lower power handling	+
B&C 6NDL38	69 +3	0.39 +0.04	7.1 -1.7	6 +2	91 -2	usable	4 Ω vs 16 Ω: amp load changes · 150 W vs 200 W: lower power handling	+
18 Sound 6ND430	66 =	0.3 -0.05	12.6 +3.8	5 +1	94 +1	usable		+
B&C 6NDL38	70 +4	0.5 +0.15	8.9 +0.1	6 +2	93 =	usable	150 W vs 200 W: lower power handling	+
B&C 6NDL38	72 +6	0.42 +0.07	7 -1.8	6 +2	92 -1	usable	8 Ω vs 16 Ω: amp load changes · 150 W vs 200 W: lower power handling	+
Beyma 6CMV2	90 +24	0.34 -0.01	6.5 -2.3	5.7 +1.7	94 +1	usable	8 Ω vs 16 Ω: amp load changes	+
Beyma 6P200Fe	58 -8	0.26 -0.09	11.1 +2.3	5 +1	93 =	usable	8 Ω vs 16 Ω: amp load changes	+
Beyma 6"P200/ND	56 -10	0.29 -0.06	11.9 +3.1	5.5 +1.5	92 -1	usable	8 Ω vs 16 Ω: amp load changes	+

Compare the closest 3 against the 6P200Fe →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.