Beyma 6"MCF200Nd
Thiele-Small parameters
| Nominal size | 6.5" |
|---|---|
| Impedance | 8 Ω |
| Fs | 406 Hz |
| Qts | 0.72 |
| Qes | 0.77 |
| Qms | 10.3 |
| Vas | 0.27 L |
| Sd | 140 cm² |
| Xmax | 2.5 mm |
| Re | 6.2 Ω |
| Bl | 18.1 T·m |
| Mms | 15 g |
| Pe | 200 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 527 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 6NSM51 | 280 -126 | 0.6 -0.12 | 0.7 +0.43 | 2.8 +0.3 | 100 +3 | risky | + | |
| B&C 6MD38 | 150 -256 | 0.5 -0.22 | 2.3 +2.03 | 3.5 +1 | 95 -2 | risky | 16 Ω vs 8 Ω: amp load changes · 120 W vs 200 W: lower power handling | + |
| B&C 6MDN44 | 138 -268 | 0.47 -0.25 | 2.8 +2.53 | 3 +0.5 | 97 = | risky | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 6MDN44 | 140 -266 | 0.4 -0.32 | 2.7 +2.43 | 2.5 = | 96.5 -0.5 | risky | + | |
| Beyma 6"MI100 | 128 -278 | 0.51 -0.21 | 3.1 +2.83 | 3 +0.5 | 94 -3 | risky | + | |
| B&C 6MD38 | 130 -276 | 0.44 -0.28 | 3 +2.73 | 2 -0.5 | 96 -1 | risky | 120 W vs 200 W: lower power handling · Xmax 2 mm < 2.5 mm: lower excursion-limited SPL | + |
| Oberton 6NM150 | 124 -282 | 0.377 -0.34 | 4 +3.73 | 2.25 -0.25 | 97 = | risky | 150 W vs 200 W: lower power handling · Xmax 2.25 mm < 2.5 mm: lower excursion-limited SPL | + |
| 18 Sound 6ND410 | 149 -257 | 0.48 -0.24 | 6.2 +5.93 | 2 -0.5 | 102 +5 | risky | 16 Ω vs 8 Ω: amp load changes · Xmax 2 mm < 2.5 mm: lower excursion-limited SPL | + |
| B&C 6MBX44 | 115 -291 | 0.35 -0.37 | 4 +3.73 | 3.5 +1 | 98 +1 | risky | 16 Ω vs 8 Ω: amp load changes | + |
| Oberton 6M150 | 115.1 -290.9 | 0.422 -0.3 | 5.35 +5.08 | 2.25 -0.25 | 96 -1 | risky | 150 W vs 200 W: lower power handling · Xmax 2.25 mm < 2.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 6"MCF200Nd →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.