← all drivers

Beyma 5P200Nd/N

5" · 8 Ω · 150 W · 92 dB · datasheet ↗

Thiele-Small parameters

Nominal size5"
Impedance8 Ω
Fs77 Hz
Qts0.23
Qes0.24
Qms7.31
Vas4.8 L
Sd95 cm²
Xmax5.7 mm
Re5.3 Ω
Mms11 g
Pe150 W
Sensitivity92 dB

Alignment hint

EBP321 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 0.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Beyma 5P200Fe72 -50.33 +0.15.7 +0.95.7 =92 =usable+
Faital PRO 5PR16090 +130.31 +0.083.7 -1.15.1 -0.692 =usableXmax 5.1 mm < 5.7 mm: lower excursion-limited SPL+
B&C 5FG4463 -140.27 +0.046.3 +1.53 -2.792 =usable100 W vs 150 W: lower power handling · Xmax 3 mm < 5.7 mm: lower excursion-limited SPL+
B&C 5NDL3880 +30.36 +0.134.3 -0.53.5 -2.291 -1usable90 W vs 150 W: lower power handling · Xmax 3.5 mm < 5.7 mm: lower excursion-limited SPL+
Faital PRO 5FE12065 -120.38 +0.155 +0.25.2 -0.588 -4usable4 Ω vs 8 Ω: amp load changes · 80 W vs 150 W: lower power handling · Xmax 5.2 mm < 5.7 mm: lower excursion-limited SPL+
Faital PRO 5FE10065 -120.33 +0.16.1 +1.35.2 -0.587 -5usable4 Ω vs 8 Ω: amp load changes · 80 W vs 150 W: lower power handling · Xmax 5.2 mm < 5.7 mm: lower excursion-limited SPL+
Sica 5 F 1.5 CP61 -160.3 +0.076.8 +23.5 -2.290.3 -1.7risky100 W vs 150 W: lower power handling · Xmax 3.5 mm < 5.7 mm: lower excursion-limited SPL+
B&C 5FG4470 -70.39 +0.165.1 +0.33 -2.790 -2risky16 Ω vs 8 Ω: amp load changes · 100 W vs 150 W: lower power handling · Xmax 3 mm < 5.7 mm: lower excursion-limited SPL+
Faital PRO 5PR120100 +230.27 +0.044.2 -0.63.1 -2.6100 +8risky100 W vs 150 W: lower power handling · Xmax 3.1 mm < 5.7 mm: lower excursion-limited SPL+
Faital PRO 5FE10065 -120.45 +0.225.7 +0.95.25 -0.4588 -4risky80 W vs 150 W: lower power handling · Xmax 5.25 mm < 5.7 mm: lower excursion-limited SPL+

Compare the closest 3 against the 5P200Nd/N →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.