Beyma 21SW1600ND
Thiele-Small parameters
| Nominal size | 21.5" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33 Hz |
| Qts | 0.382 |
| Qes | 0.4 |
| Qms | 8.37 |
| Vas | 268 L |
| Sd | 1734 cm² |
| Xmax | 8.9 mm |
| Re | 5.3 Ω |
| Bl | 31.7 T·m |
| Mms | 365.8 g |
| Pe | 1600 W |
| Sensitivity | 97.6 dB |
Alignment hint
| EBP | 83 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 110.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 21 SW 115 | 32.5 -0.5 | 0.404 +0.02 | 268.7 +0.7 | 9.9 +1 | 99.2 +1.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Ciare NDC 21-5 | 32.2 -0.8 | 0.344 -0.04 | 270.8 +2.8 | 8.8 -0.1 | 97.2 -0.4 | close | Xmax 8.8 mm < 8.9 mm: lower excursion-limited SPL | + |
| B&C 21 SW 115 v2015 | 33 = | 0.353 -0.03 | 278 +10 | 9.3 +0.4 | 100.6 +3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 21L50 | 33 = | 0.434 +0.05 | 300 +32 | 7.9 -1 | 97 -0.6 | close | 1000 W vs 1600 W: lower power handling · Xmax 7.9 mm < 8.9 mm: lower excursion-limited SPL | + |
| LaVoce SAF214.50 vp | 30 -3 | 0.401 +0.02 | 311 +43 | 11.6 +2.7 | 96.4 -1.2 | close | + | |
| LaVoce SAF214.50 | 30 -3 | 0.435 +0.05 | 267 -1 | 11.6 +2.7 | 95.6 -2 | close | + | |
| SB Audience NERO-21SW1100D | 32 -1 | 0.339 -0.04 | 312.6 +44.6 | 8.1 -0.8 | 98.6 +1 | close | 1100 W vs 1600 W: lower power handling · Xmax 8.1 mm < 8.9 mm: lower excursion-limited SPL | + |
| MC Kenzie FRL-21/1200-LF | 30 -3 | 0.378 = | 374 +106 | 9.5 +0.6 | 98 +0.4 | close | 1200 W vs 1600 W: lower power handling | + |
| RCF LF 21N401 | 30 -3 | 0.378 = | 374 +106 | 10.6 +1.7 | 98 +0.4 | usable | + | |
| 18 Sound 21NLW9000 | 29 -4 | 0.347 -0.04 | 304 +36 | 10.7 +1.8 | 96.4 -1.2 | usable | + |
Compare the closest 3 against the 21SW1600ND →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.