Beyma 18SW1600ND
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 32 Hz |
| Qts | 0.33 |
| Qes | 0.34 |
| Qms | 11.74 |
| Vas | 205.7 L |
| Sd | 1255 cm² |
| Xmax | 10 mm |
| Re | 5.5 Ω |
| Bl | 29.4 T·m |
| Mms | 265.5 g |
| Pe | 1600 W |
| Sensitivity | 96.6 dB |
Alignment hint
| EBP | 94 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 57.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 18HW1070 | 32 = | 0.33 = | 191.5 -14.2 | 13 +3 | 96 -0.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
| RCF LF 18N408 | 30 -2 | 0.327 = | 193 -12.7 | 9.8 -0.2 | 96.3 -0.3 | close | Xmax 9.8 mm < 10 mm: lower excursion-limited SPL | + |
| 18 Sound 18LW1400 | 33 +1 | 0.32 -0.01 | 210 +4.3 | 9 -1 | 97 +0.4 | close | 4 Ω vs 8 Ω: amp load changes · 1000 W vs 1600 W: lower power handling · Xmax 9 mm < 10 mm: lower excursion-limited SPL | + |
| RCF LF 18N405 | 30 -2 | 0.324 -0.01 | 227 +21.3 | 10.8 +0.8 | 96.7 +0.1 | close | + | |
| B&C 18 SW 115 | 32 = | 0.303 -0.03 | 187 -18.7 | 9.8 -0.2 | 96.6 = | close | Xmax 9.8 mm < 10 mm: lower excursion-limited SPL | + |
| RCF LF18N408 | 30 -2 | 0.33 = | 193 -12.7 | 15 +5 | 97 +0.4 | close | + | |
| Faital PRO 18XL1600 | 32 = | 0.31 -0.02 | 201.1 -4.6 | 12.92 +2.92 | 98 +1.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 18NLW9000 | 34 +2 | 0.31 -0.02 | 206 +0.3 | 14 +4 | 97 +0.4 | close | + | |
| 18 Sound 18LW2420 | 34 +2 | 0.31 -0.02 | 208 +2.3 | 10 = | 98 +1.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Sica 18 S 4 CP | 33 +1 | 0.35 +0.02 | 225 +19.3 | 11 +1 | 97.1 +0.5 | close | 1200 W vs 1600 W: lower power handling | + |
Compare the closest 3 against the 18SW1600ND →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.