Beyma 18QLEX1600Fe
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.23 |
| Qes | 0.24 |
| Qms | 6.5 |
| Vas | 195 L |
| Sd | 1255 cm² |
| Xmax | 13 mm |
| Re | 5.3 Ω |
| Bl | 36.4 T·m |
| Mms | 323 g |
| Pe | 1600 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 125 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 23.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 18QLEX1600Fe | 31 +1 | 0.25 +0.02 | 177.2 -17.8 | 13 = | 96 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 18QLEX1600/Fe | 30 = | 0.231 = | 195 = | 8.3 -4.7 | 97.2 +0.2 | close | Xmax 8.3 mm < 13 mm: lower excursion-limited SPL | + |
| Precision Devices PD.1850/2 | 33.1 +3.1 | 0.24 +0.01 | 203.84 +8.84 | 11.1 -1.9 | 96.7 -0.3 | close | 800 W vs 1600 W: lower power handling · Xmax 11.1 mm < 13 mm: lower excursion-limited SPL | + |
| 18 Sound 18NLW4100 | 29 -1 | 0.27 +0.04 | 207 +12 | 15 +2 | 97 = | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 18LW2600 | 30 = | 0.28 +0.05 | 186 -9 | 14 +1 | 96.5 -0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Precision Devices PD.185N02 | 35.2 +5.2 | 0.24 +0.01 | 178.28 -16.72 | 12 -1 | 96.8 -0.2 | close | 1100 W vs 1600 W: lower power handling · Xmax 12 mm < 13 mm: lower excursion-limited SPL | + |
| RCF LF18X451 | 30 = | 0.28 +0.05 | 220 +25 | 14 +1 | 97 = | close | + | |
| B&C 18DS100 | 32 +2 | 0.24 +0.01 | 157 -38 | 14 +1 | 98 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 18DS115 | 30 = | 0.2 -0.03 | 168 -27 | 16.5 +3.5 | 98 +1 | close | + | |
| Precision Devices PD.185C003-8 | 33 +3 | 0.24 +0.01 | 224 +29 | 11 -2 | 97.3 +0.3 | close | 1000 W vs 1600 W: lower power handling · Xmax 11 mm < 13 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18QLEX1600Fe →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.