Beyma 18PWB1000/FE v2016
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 27 Hz |
| Qts | 0.381 |
| Qes | 0.4 |
| Qms | 8.2 |
| Vas | 317 L |
| Sd | 1255 cm² |
| Xmax | 11.7 mm |
| Re | 6 Ω |
| Bl | 24.8 T·m |
| Mms | 242 g |
| Pe | 1000 W |
| Sensitivity | 95.2 dB |
Alignment hint
| EBP | 68 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 129.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 18PWB1000Fe/S | 27 = | 0.38 = | 317 = | 12.5 +0.8 | 96 +0.8 | close | + | |
| BMS 18N862 vp | 24.8 -2.2 | 0.383 = | 345.6 +28.6 | 16.2 +4.5 | 94.8 -0.4 | close | + | |
| BMS 18N860 | 24 -3 | 0.372 -0.01 | 304 -13 | 15 +3.3 | 93.7 -1.5 | close | + | |
| BMS 18N862 | 25.1 -1.9 | 0.34 -0.04 | 312 -5 | 19 +7.3 | 95 -0.2 | close | + | |
| Magnat AGRESSOR 5000 | 24 -3 | 0.431 +0.05 | 324 +7 | 10.6 -1.1 | 95.3 +0.1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 10.6 mm < 11.7 mm: lower excursion-limited SPL | + |
| AER SB 18 | 26 -1 | 0.383 = | 288 -29 | 8.3 -3.4 | 94.5 -0.7 | close | 500 W vs 1000 W: lower power handling · Xmax 8.3 mm < 11.7 mm: lower excursion-limited SPL | + |
| Beyma 18G550 (prodance) | 29.5 +2.5 | 0.382 = | 291 -26 | 9 -2.7 | 96.7 +1.5 | close | Xmax 9 mm < 11.7 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS PRIME 18XS | 33 +6 | 0.385 = | 257 -60 | 12 +0.3 | 95.4 +0.2 | close | + | |
| JBL 2269H | 28 +1 | 0.361 -0.02 | 237 -80 | 10.6 -1.1 | 95 -0.2 | close | Xmax 10.6 mm < 11.7 mm: lower excursion-limited SPL | + |
| Dayton Audio APOLLO 18F | 32 +5 | 0.401 +0.02 | 287.7 -29.3 | 10.6 -1.1 | 96.4 +1.2 | usable | Xmax 10.6 mm < 11.7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18PWB1000/FE v2016 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.