Beyma 18P100FE
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 40 Hz |
| Qts | 0.39 |
| Qes | 0.4 |
| Qms | 15.11 |
| Vas | 163.2 L |
| Sd | 1250 cm² |
| Xmax | 7.1 mm |
| Re | 5.1 Ω |
| Bl | 26.1 T·m |
| Mms | 212.5 g |
| Pe | 1000 W |
| Sensitivity | 98.1 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 71.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 18P1000Nd | 40 = | 0.412 +0.02 | 178 +14.8 | 7.6 +0.5 | 98.2 +0.1 | close | + | |
| RCF LF 18P400 | 39.5 -0.5 | 0.391 = | 201 +37.8 | 8 +0.9 | 99 +0.9 | close | + | |
| LaVoce SAN184.02 | 38 -2 | 0.406 +0.02 | 150 -13.2 | 7.9 +0.8 | 96.8 -1.3 | close | + | |
| PD PD 185N01 | 35.6 -4.4 | 0.383 -0.01 | 174.5 +11.3 | 8.4 +1.3 | 97.1 -1 | close | + | |
| Precision Devices PD 185N01 | 35.6 -4.4 | 0.383 -0.01 | 174.5 +11.3 | 8.4 +1.3 | 97.1 -1 | close | + | |
| Sica 18 S 4 PL | 36.2 -3.8 | 0.39 = | 189 +25.8 | 8 +0.9 | 97.3 -0.8 | close | + | |
| Faital PRO 18HP1042 | 38 -2 | 0.41 +0.02 | 191.9 +28.7 | 9 +1.9 | 98 -0.1 | close | + | |
| B&C 18 PZB 46 | 37 -3 | 0.374 -0.02 | 155 -8.2 | 6.5 -0.6 | 96.8 -1.3 | close | 700 W vs 1000 W: lower power handling · Xmax 6.5 mm < 7.1 mm: lower excursion-limited SPL | + |
| LaVoce SAF184.02 | 38 -2 | 0.422 +0.03 | 150 -13.2 | 8.1 +1 | 96.9 -1.2 | close | + | |
| P.Audio BM-18LF | 39.8 -0.2 | 0.432 +0.04 | 169.9 +6.7 | 5.8 -1.3 | 97.7 -0.4 | close | 500 W vs 1000 W: lower power handling · Xmax 5.8 mm < 7.1 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18P100FE →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.