Beyma 18LX60V2
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.485 |
| Qes | 0.5 |
| Qms | 15.72 |
| Vas | 236.5 L |
| Sd | 1320 cm² |
| Xmax | 8 mm |
| Re | 5.1 Ω |
| Bl | 21.9 T·m |
| Mms | 213.5 g |
| Pe | 700 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 70 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 210.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 18"LX60V2/S | 35 = | 0.48 -0.01 | 236 -0.5 | 8 = | 98 +1 | close | + | |
| Selenium 18SW1P | 37 +2 | 0.442 -0.04 | 232 -4.5 | 8.7 +0.7 | 97.7 +0.7 | close | + | |
| P.Audio P180/2242 | 37 +2 | 0.48 -0.01 | 231.72 -4.78 | 7 -1 | 95.5 -1.5 | close | Xmax 7 mm < 8 mm: lower excursion-limited SPL | + |
| SB Audience 18SW800 | 33 -2 | 0.456 -0.03 | 258.1 +21.6 | 9.3 +1.3 | 96.8 -0.2 | close | + | |
| Turbosound TS-18SW700/8A | 35 = | 0.433 -0.05 | 250 +13.5 | 7.5 -0.5 | 97.7 +0.7 | close | Xmax 7.5 mm < 8 mm: lower excursion-limited SPL | + |
| MC Kenzie C18.500BS | 37 +2 | 0.484 = | 252 +15.5 | 6.5 -1.5 | 96.4 -0.6 | close | 500 W vs 700 W: lower power handling · Xmax 6.5 mm < 8 mm: lower excursion-limited SPL | + |
| Monacor SP-46A/500BS | 36 +1 | 0.485 = | 250 +13.5 | 6 -2 | 96.6 -0.4 | close | 500 W vs 700 W: lower power handling · Xmax 6 mm < 8 mm: lower excursion-limited SPL | + |
| DAS Audio 18LXN | 38.5 +3.5 | 0.45 -0.03 | 213.7 -22.8 | 8 = | 97.2 +0.2 | close | + | |
| B&C 18 PS 100 (prodance) | 31.5 -3.5 | 0.458 -0.03 | 268 +31.5 | 8 = | 96.2 -0.8 | close | + | |
| Faital PRO 18HP1010 | 35 = | 0.4 -0.08 | 240.1 +3.6 | 9.75 +1.75 | 98 +1 | close | + |
Compare the closest 3 against the 18LX60V2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.