Beyma 18LEX1600/ND-8
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.39 |
| Qes | 0.42 |
| Qms | 5.4 |
| Vas | 205 L |
| Sd | 1255 cm² |
| Xmax | 10.4 mm |
| Re | 5.5 Ω |
| Bl | 25.3 T·m |
| Mms | 222.7 g |
| Pe | 1600 W |
| Sensitivity | 96.8 dB |
Alignment hint
| EBP | 83 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 89.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 18NBX100 | 35 = | 0.38 -0.01 | 198 -7 | 10 -0.4 | 96.5 -0.3 | close | 1200 W vs 1600 W: lower power handling · Xmax 10 mm < 10.4 mm: lower excursion-limited SPL | + |
| Faital PRO 18HP1060 | 35 = | 0.37 -0.02 | 200.3 -4.7 | 12.45 +2.05 | 98 +1.2 | close | 1200 W vs 1600 W: lower power handling | + |
| B&C 18SW100 | 35 = | 0.38 -0.01 | 180 -25 | 12.5 +2.1 | 97 +0.2 | close | + | |
| Beyma 18LEX1600Fe | 34 -1 | 0.38 -0.01 | 188 -17 | 13 +2.6 | 97 +0.2 | close | + | |
| B&C 18NBX100 | 35 = | 0.37 -0.02 | 192 -13 | 10 -0.4 | 96 -0.8 | close | 4 Ω vs 8 Ω: amp load changes · 1200 W vs 1600 W: lower power handling · Xmax 10 mm < 10.4 mm: lower excursion-limited SPL | + |
| B&C 18TBW100 | 35 = | 0.39 = | 175 -30 | 12 +1.6 | 96 -0.8 | close | + | |
| B&C 18 SW 100 | 35 = | 0.375 -0.02 | 180 -25 | 9.7 -0.7 | 96.9 +0.1 | close | Xmax 9.7 mm < 10.4 mm: lower excursion-limited SPL | + |
| Faital PRO 18HW1070 | 32 -3 | 0.38 -0.01 | 195.9 -9.1 | 13 +2.6 | 97 +0.2 | close | + | |
| Faital PRO 18HP1030 | 35 = | 0.41 +0.02 | 185.5 -19.5 | 12.45 +2.05 | 98 +1.2 | close | 1200 W vs 1600 W: lower power handling | + |
| 18 Sound 18 TLW 3000 | 33 -2 | 0.407 +0.02 | 185 -20 | 11.6 +1.2 | 96.4 -0.4 | close | + |
Compare the closest 3 against the 18LEX1600/ND-8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.