Beyma 15T100/N vp
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.455 |
| Qes | 0.55 |
| Qms | 2.63 |
| Vas | 275 L |
| Sd | 851 cm² |
| Xmax | 6 mm |
| Re | 5.7 Ω |
| Bl | 13.2 T·m |
| Mms | 76.3 g |
| Pe | 200 W |
| Sensitivity | 96.8 dB |
Alignment hint
| EBP | 64 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 194.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 15FH500 | 35 = | 0.45 -0.01 | 217.1 -57.9 | 9.25 +3.25 | 97 +0.2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| DAS Audio 15L | 38 +3 | 0.418 -0.04 | 263 -12 | 6 = | 98.1 +1.3 | close | + | |
| Beyma SM115/N 8 ohms | 35 = | 0.382 -0.07 | 267 -8 | 7.3 +1.3 | 97.5 +0.7 | close | + | |
| Beyma SM115/N v2015 | 35 = | 0.382 -0.07 | 267 -8 | 7.3 +1.3 | 97.5 +0.7 | close | + | |
| MCM Electronics 55-3234 | 32.5 -2.5 | 0.458 = | 322.2 +47.2 | 6 = | 98.9 +2.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| MCM Electronics 55-2974 | 32.5 -2.5 | 0.473 +0.02 | 322.2 +47.2 | 6 = | 95.4 -1.4 | close | + | |
| Celestion PULSE 15 | 35.7 +0.7 | 0.431 -0.02 | 246.7 -28.3 | 4.8 -1.2 | 97.2 +0.4 | close | Xmax 4.8 mm < 6 mm: lower excursion-limited SPL | + |
| Eminence BASSLITE C2515 | 38 +3 | 0.45 -0.01 | 260 -15 | 4.5 -1.5 | 96.4 -0.4 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 4.5 mm < 6 mm: lower excursion-limited SPL | + |
| Faital PRO 15PR300 | 35 = | 0.48 +0.02 | 220.1 -54.9 | 5.23 -0.77 | 97 +0.2 | close | Xmax 5.23 mm < 6 mm: lower excursion-limited SPL | + |
| MCM Electronics 55-3213 | 32.5 -2.5 | 0.473 +0.02 | 322.2 +47.2 | 6 = | 98.7 +1.9 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 15T100/N vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.