Beyma 15P1200Nd/N
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 42 Hz |
| Qts | 0.313 |
| Qes | 0.32 |
| Qms | 14.2 |
| Vas | 84.7 L |
| Sd | 855 cm² |
| Xmax | 7.1 mm |
| Re | 5.2 Ω |
| Bl | 27.3 T·m |
| Mms | 173.7 g |
| Pe | 1200 W |
| Sensitivity | 96.8 dB |
Alignment hint
| EBP | 131 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 15P1200Nd | 45 +3 | 0.316 = | 84 -0.7 | 6.8 -0.3 | 97.4 +0.6 | close | Xmax 6.8 mm < 7.1 mm: lower excursion-limited SPL | + |
| Beyma 15"P1000Fe V2 | 45 +3 | 0.3 -0.01 | 80.7 -4 | 8 +0.9 | 98 +1.2 | close | + | |
| B&C 15 TBX 100 v2013 | 39 -3 | 0.307 -0.01 | 96 +11.3 | 6.9 -0.2 | 96.4 -0.4 | close | Xmax 6.9 mm < 7.1 mm: lower excursion-limited SPL | + |
| B&C 15 TBW 100 | 39 -3 | 0.307 -0.01 | 96 +11.3 | 8.4 +1.3 | 96.4 -0.4 | close | + | |
| Faital PRO 15HP1030 | 40 -2 | 0.3 -0.01 | 88.3 +3.6 | 12.45 +5.35 | 96 -0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Celestion FTR15-4080HDX | 40.5 -1.5 | 0.33 +0.02 | 104.3 +19.6 | 7.3 +0.2 | 96.8 = | close | + | |
| Faital PRO 15XL1400 | 38 -4 | 0.3 -0.01 | 84.3 -0.4 | 12.92 +5.82 | 96 -0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 15P1000Nd | 45 +3 | 0.347 +0.03 | 88 +3.3 | 6.7 -0.4 | 97.4 +0.6 | close | Xmax 6.7 mm < 7.1 mm: lower excursion-limited SPL | + |
| Beyma 15SW1300ND | 44 +2 | 0.361 +0.05 | 89.6 +4.9 | 7.8 +0.7 | 97 +0.2 | close | + | |
| Faital PRO 15HP1060 | 40 -2 | 0.31 = | 100.3 +15.6 | 12.45 +5.35 | 97 +0.2 | close | + |
Compare the closest 3 against the 15P1200Nd/N →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.