Beyma 15P1000FEV2
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 42 Hz |
| Qts | 0.278 |
| Qes | 0.29 |
| Qms | 6.6 |
| Vas | 100.2 L |
| Sd | 855 cm² |
| Xmax | 6.5 mm |
| Re | 5.3 Ω |
| Bl | 26.6 T·m |
| Mms | 146.9 g |
| Pe | 1000 W |
| Sensitivity | 97.9 dB |
Alignment hint
| EBP | 145 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 18.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 15MB701 | 44.24 +2.24 | 0.268 -0.01 | 100.22 +0.02 | 9.25 +2.75 | 97.5 -0.4 | close | 700 W vs 1000 W: lower power handling | + |
| BMS 15CN860 | 46 +4 | 0.276 = | 102 +1.8 | 6 -0.5 | 98.7 +0.8 | close | Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| B&C 14 NDL 88 | 45 +3 | 0.298 +0.02 | 102 +1.8 | 6.7 +0.2 | 98.8 +0.9 | close | 700 W vs 1000 W: lower power handling | + |
| 18 Sound 15LW1402 | 42 = | 0.28 = | 126 +25.8 | 7 +0.5 | 98.4 +0.5 | close | + | |
| Sica 15 F 4 CP | 46.4 +4.4 | 0.27 -0.01 | 97 -3.2 | 7 +0.5 | 99.4 +1.5 | close | 700 W vs 1000 W: lower power handling | + |
| Oberton 15NXB1000 | 38.34 -3.66 | 0.283 = | 105.5 +5.3 | 9 +2.5 | 97 -0.9 | close | + | |
| Oberton 15XL701 | 45.25 +3.25 | 0.28 = | 116.99 +16.79 | 8.75 +2.25 | 98 +0.1 | close | 700 W vs 1000 W: lower power handling | + |
| B&C 15 TBW 100-4 | 39 -3 | 0.285 +0.01 | 88 -12.2 | 7.8 +1.3 | 98.4 +0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 15 PZB 100 | 39 -3 | 0.287 +0.01 | 110 +9.8 | 6 -0.5 | 97.2 -0.7 | close | 700 W vs 1000 W: lower power handling · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| B&C 15PZB100 | 39 -3 | 0.29 +0.01 | 110 +9.8 | 8 +1.5 | 97 -0.9 | close | 700 W vs 1000 W: lower power handling | + |
Compare the closest 3 against the 15P1000FEV2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.