Beyma 15MCS500-8
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 46 Hz |
| Qts | 0.47 |
| Qes | 0.5 |
| Qms | 7.8 |
| Vas | 133.5 L |
| Sd | 880 cm² |
| Xmax | 6.5 mm |
| Re | 5.8 Ω |
| Bl | 18.1 T·m |
| Mms | 97.3 g |
| Pe | 500 W |
| Sensitivity | 97.5 dB |
Alignment hint
| EBP | 92 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 105.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 15MCS500 | 46 = | 0.48 +0.01 | 134 +0.5 | 8 +1.5 | 98 +0.5 | close | + | |
| Beyma 15MC500 | 46 = | 0.45 -0.02 | 134 +0.5 | 8 +1.5 | 98 +0.5 | close | + | |
| MCM Electronics 55-3243 | 43.6 -2.4 | 0.465 = | 127.5 -6 | 6.2 -0.3 | 98.5 +1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 6.2 mm < 6.5 mm: lower excursion-limited SPL | + |
| Eminence KAPPALITE 3015 LF v2018 | 44 -2 | 0.456 -0.01 | 150.9 +17.4 | 6.6 +0.1 | 97.9 +0.4 | close | + | |
| Eminence KAPPALITE 3015 LF v2014 | 43.7 -2.3 | 0.456 -0.01 | 150.9 +17.4 | 6.6 +0.1 | 97.8 +0.3 | close | + | |
| Eminence KAPPALITE 3015 LF v2016 | 43.7 -2.3 | 0.456 -0.01 | 150.9 +17.4 | 6.6 +0.1 | 97.8 +0.3 | close | + | |
| SICA P-A-PL15B3S | 46.5 +0.5 | 0.479 +0.01 | 139.8 +6.3 | 5.5 -1 | 98.3 +0.8 | close | 350 W vs 500 W: lower power handling · Xmax 5.5 mm < 6.5 mm: lower excursion-limited SPL | + |
| Turbosound TS-15W300/8A | 46 = | 0.476 +0.01 | 130.2 -3.3 | 4.9 -1.6 | 97 -0.5 | close | 300 W vs 500 W: lower power handling · Xmax 4.9 mm < 6.5 mm: lower excursion-limited SPL | + |
| RCF L 15P530 | 45 -1 | 0.478 +0.01 | 160 +26.5 | 6.2 -0.3 | 98.5 +1 | close | 350 W vs 500 W: lower power handling · Xmax 6.2 mm < 6.5 mm: lower excursion-limited SPL | + |
| Eminence KappaLITE 3015LF | 44 -2 | 0.46 -0.01 | 150.9 +17.4 | 9.6 +3.1 | 98.4 +0.9 | close | + |
Compare the closest 3 against the 15MCS500-8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.