Beyma 15MC700
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 41 Hz |
| Qts | 0.352 |
| Qes | 0.38 |
| Qms | 4.8 |
| Vas | 153 L |
| Sd | 880 cm² |
| Xmax | 7.4 mm |
| Re | 5.9 Ω |
| Bl | 20.7 T·m |
| Mms | 106.9 g |
| Pe | 700 W |
| Sensitivity | 97.7 dB |
Alignment hint
| EBP | 108 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 50.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KILOMAX 15 | 41 = | 0.383 +0.03 | 154 +1 | 7.9 +0.5 | 98.3 +0.6 | close | + | |
| Eminence KILOMAX PRO 15 | 41 = | 0.383 +0.03 | 154.5 +1.5 | 7.9 +0.5 | 98.3 +0.6 | close | + | |
| Eminence KILOMAX PRO 15 A | 41 = | 0.383 +0.03 | 154.5 +1.5 | 7.9 +0.5 | 98.3 +0.6 | close | + | |
| PD PD 15BR40 | 38.7 -2.3 | 0.34 -0.01 | 158.3 +5.3 | 7.9 +0.5 | 98.1 +0.4 | close | + | |
| Precision Devices PD 15BR40 | 38.7 -2.3 | 0.34 -0.01 | 158.3 +5.3 | 7.9 +0.5 | 98.1 +0.4 | close | + | |
| 18 Sound 15ND940 | 41 = | 0.36 +0.01 | 166 +13 | 9.5 +2.1 | 98.5 +0.8 | close | 16 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 15ND830 | 42 +1 | 0.34 -0.01 | 157 +4 | 6.5 -0.9 | 98 +0.3 | close | 4 Ω vs 8 Ω: amp load changes · 450 W vs 700 W: lower power handling · Xmax 6.5 mm < 7.4 mm: lower excursion-limited SPL | + |
| Faital PRO 15FH500 vp3 | 40.8 -0.2 | 0.343 -0.01 | 141.8 -11.2 | 6.7 -0.7 | 98.2 +0.5 | close | 500 W vs 700 W: lower power handling · Xmax 6.7 mm < 7.4 mm: lower excursion-limited SPL | + |
| Faital PRO 15FH520 | 38 -3 | 0.34 -0.01 | 153.2 +0.2 | 9.15 +1.75 | 97 -0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| P.Audio S15-100LF | 38 -3 | 0.35 = | 169.1 +16.1 | 7.8 +0.4 | 98 +0.3 | close | + |
Compare the closest 3 against the 15MC700 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.