← all drivers

Beyma 15LEX1600Fe

15" · 8 Ω · 1600 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance8 Ω
Fs38 Hz
Qts0.33
Qes0.34
Qms6.9
Vas106 L
Sd880 cm²
Xmax13 mm
Re5.3 Ω
Bl25.8 T·m
Mms179 g
Pe1600 W
Sensitivity96 dB

Alignment hint

EBP112 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 29.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Faital PRO 15XL140038 =0.33 =91.2 -14.812.92 -0.0896 =closeXmax 12.92 mm < 13 mm: lower excursion-limited SPL+
BMS 15N850vv237 -10.33 =110.96 +4.9612 -195 -1close1200 W vs 1600 W: lower power handling · Xmax 12 mm < 13 mm: lower excursion-limited SPL+
Oberton 15NXB120138.49 +0.490.324 -0.01111.94 +5.9412 -197 +1close1200 W vs 1600 W: lower power handling · Xmax 12 mm < 13 mm: lower excursion-limited SPL+
Faital PRO 15HP103040 +20.34 +0.0195 -1112.45 -0.5596 =close1000 W vs 1600 W: lower power handling · Xmax 12.45 mm < 13 mm: lower excursion-limited SPL+
B&C 15SW10037 -10.31 -0.02110 +412.5 -0.595 -1closeXmax 12.5 mm < 13 mm: lower excursion-limited SPL+
B&C 15TBW10039 +10.31 -0.0296 -1012 -196 =closeXmax 12 mm < 13 mm: lower excursion-limited SPL+
Faital PRO 15HP106040 +20.31 -0.02100.3 -5.712.45 -0.5597 +1close1000 W vs 1600 W: lower power handling · Xmax 12.45 mm < 13 mm: lower excursion-limited SPL+
B&C 15 SW 10037 -10.318 -0.01110 +49.5 -3.595.8 -0.2closeXmax 9.5 mm < 13 mm: lower excursion-limited SPL+
Faital PRO 15XL140038 =0.3 -0.0384.3 -21.712.92 -0.0896 =close4 Ω vs 8 Ω: amp load changes · Xmax 12.92 mm < 13 mm: lower excursion-limited SPL+
Beyma 15LEX1600Nd41 +30.36 +0.0391 -1514.5 +1.596 =close+

Compare the closest 3 against the 15LEX1600Fe →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.