Beyma 15CM V2
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 49 Hz |
| Qts | 0.49 |
| Qes | 0.55 |
| Qms | 4.1 |
| Vas | 104 L |
| Sd | 880 cm² |
| Xmax | 7 mm |
| Re | 6 Ω |
| Bl | 18.8 T·m |
| Mms | 106 g |
| Pe | 350 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 89 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 96.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 15FW88 | 49 = | 0.43 -0.06 | 103.7 -0.3 | 8 +1 | 98 +1 | close | + | |
| Beyma 15CMV2 v2021 | 49 = | 0.485 -0.01 | 104 = | 4.5 -2.5 | 96.7 -0.3 | close | Xmax 4.5 mm < 7 mm: lower excursion-limited SPL | + |
| PD PD 156 v2014 | 50.3 +1.3 | 0.469 -0.02 | 93.4 -10.6 | 5.7 -1.3 | 97.2 +0.2 | close | Xmax 5.7 mm < 7 mm: lower excursion-limited SPL | + |
| Precision Devices PD 156 v2014 | 50.3 +1.3 | 0.469 -0.02 | 93.4 -10.6 | 5.7 -1.3 | 97.2 +0.2 | close | Xmax 5.7 mm < 7 mm: lower excursion-limited SPL | + |
| Beyma 15LX60V2 | 42 -7 | 0.441 -0.05 | 105.5 +1.5 | 6.9 -0.1 | 96.3 -0.7 | close | Xmax 6.9 mm < 7 mm: lower excursion-limited SPL | + |
| Eminence DEFINIMAX 4015 LF | 42 -7 | 0.5 +0.01 | 115.5 +11.5 | 9 +2 | 96 -1 | close | + | |
| Beyma 15MCS500 | 46 -3 | 0.48 -0.01 | 134 +30 | 8 +1 | 98 +1 | close | + | |
| Beyma 15"LX60V2 | 42 -7 | 0.44 -0.05 | 105.53 +1.53 | 8 +1 | 98 +1 | close | + | |
| Beyma 15MCS500-8 | 46 -3 | 0.47 -0.02 | 133.5 +29.5 | 6.5 -0.5 | 97.5 +0.5 | close | Xmax 6.5 mm < 7 mm: lower excursion-limited SPL | + |
| Eminence KAPPALITE 3015 LF-4 | 47 -2 | 0.468 -0.02 | 118.6 +14.6 | 5.7 -1.3 | 99.2 +2.2 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 5.7 mm < 7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15CM V2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.