Beyma 15B100R
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 20 Hz |
| Qts | 0.14 |
| Qes | 0.32 |
| Qms | 0.25 |
| Vas | 590 L |
| Sd | 851 cm² |
| Xmax | 3 mm |
| Re | 6 Ω |
| Bl | 16 T·m |
| Mms | 109 g |
| Pe | 150 W |
| Sensitivity | 94.9 dB |
Alignment hint
| EBP | 63 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 24.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Electro-Voice DL 15W | 21 +1 | 0.164 +0.02 | 575 -15 | 5.6 +2.6 | 98.2 +3.3 | usable | + | |
| Audax PR38SM250 | 19.5 -0.5 | 0.177 +0.04 | 660 +70 | 4 +1 | 97.7 +2.8 | usable | + | |
| JBL 1501AL-1 | 19 -1 | 0.191 +0.05 | 630 +40 | 6.4 +3.4 | 94.6 -0.3 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Fertin Acoustics 38EX-2 | 25 +5 | 0.135 -0.01 | 595 +5 | 3 = | 102.2 +7.3 | usable | 80 W vs 150 W: lower power handling | + |
| Altec 515B | 24.7 +4.7 | 0.166 +0.03 | 557.8 -32.2 | 4.2 +1.2 | 97.2 +2.3 | usable | 16 Ω vs 8 Ω: amp load changes · 75 W vs 150 W: lower power handling | + |
| Altec 515C | 24.7 +4.7 | 0.166 +0.03 | 557.8 -32.2 | 4.2 +1.2 | 97.2 +2.3 | usable | 16 Ω vs 8 Ω: amp load changes · 75 W vs 150 W: lower power handling | + |
| Fluxmag 1504-DF | 21.6 +1.6 | 0.132 -0.01 | 393.2 -196.8 | 4 +1 | 98.9 +4 | usable | + | |
| Altec 515E | 22.9 +2.9 | 0.185 +0.04 | 665.5 +75.5 | 4.6 +1.6 | 96.5 +1.6 | usable | 16 Ω vs 8 Ω: amp load changes · 75 W vs 150 W: lower power handling | + |
| Tannoy K3838 | 22 +2 | 0.176 +0.04 | 481.4 -108.6 | 4 +1 | 97.9 +3 | usable | + | |
| EMS B15EX-12.5V | 22 +2 | 0.146 +0.01 | 791 +201 | 5.4 +2.4 | 100.4 +5.5 | usable | 100 W vs 150 W: lower power handling | + |
Compare the closest 3 against the 15B100R →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.