Beyma 15"P1000Fe V2

15" · 8 Ω · 1000 W · 98 dB · datasheet ↗

Thiele-Small parameters

Nominal size	15"
Impedance	8 Ω
Fs	45 Hz
Qts	0.3
Qes	0.31
Qms	5.86
Vas	80.7 L
Sd	855 cm²
Xmax	8 mm
Re	5.2 Ω
Bl	27.4 T·m
Mms	157 g
Pe	1000 W
Sensitivity	98 dB

Alignment hint

EBP	145 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 17.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 15P1200Nd	45 =	0.316 +0.02	84 +3.3	6.8 -1.2	97.4 -0.6	close	Xmax 6.8 mm < 8 mm: lower excursion-limited SPL	+
B&C 15NA100	47 +2	0.28 -0.02	88 +7.3	10 +2	98 =	close		+
Sica 15 K 4 PL	46.5 +1.5	0.3 =	102.3 +21.6	8 =	99.2 +1.2	close		+
Beyma 15P1200Nd/N	42 -3	0.313 +0.01	84.7 +4	7.1 -0.9	96.8 -1.2	close	Xmax 7.1 mm < 8 mm: lower excursion-limited SPL	+
B&C 15 TBW 100-4	39 -6	0.285 -0.02	88 +7.3	7.8 -0.2	98.4 +0.4	close	4 Ω vs 8 Ω: amp load changes · Xmax 7.8 mm < 8 mm: lower excursion-limited SPL	+
B&C 14 NDL 88	45 =	0.298 =	102 +21.3	6.7 -1.3	98.8 +0.8	close	700 W vs 1000 W: lower power handling · Xmax 6.7 mm < 8 mm: lower excursion-limited SPL	+
Faital PRO 15HP1030	40 -5	0.3 =	88.3 +7.6	12.45 +4.45	96 -2	close	4 Ω vs 8 Ω: amp load changes	+
RCF W390	46.4 +1.4	0.299 =	87.7 +7	6 -2	100 +2	close	4 Ω vs 8 Ω: amp load changes · Xmax 6 mm < 8 mm: lower excursion-limited SPL	+
Faital PRO 15XL1400	38 -7	0.3 =	84.3 +3.6	12.92 +4.92	96 -2	close	4 Ω vs 8 Ω: amp load changes	+
Oberton 15MB701	44.24 -0.76	0.268 -0.03	100.22 +19.52	9.25 +1.25	97.5 -0.5	close	700 W vs 1000 W: lower power handling	+

Compare the closest 3 against the 15"P1000Fe V2 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.