Beyma 12BR70
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.355 |
| Qes | 0.44 |
| Qms | 1.85 |
| Vas | 135 L |
| Sd | 540 cm² |
| Xmax | 4.8 mm |
| Re | 5.6 Ω |
| Bl | 13.2 T·m |
| Mms | 62.6 g |
| Pe | 125 W |
| Sensitivity | 94.7 dB |
Alignment hint
| EBP | 80 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 45.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Ardan W PRO-31 | 36.8 +1.8 | 0.373 +0.02 | 133.9 -1.1 | 6 +1.2 | 94.6 -0.1 | close | + | |
| Supravox 285 GMF vp5 | 35 = | 0.372 +0.02 | 150 +15 | 4 -0.8 | 95.4 +0.7 | close | 70 W vs 125 W: lower power handling · Xmax 4 mm < 4.8 mm: lower excursion-limited SPL | + |
| Supravox 285 GMF vp6 | 35 = | 0.372 +0.02 | 150 +15 | 4 -0.8 | 95.4 +0.7 | close | 70 W vs 125 W: lower power handling · Xmax 4 mm < 4.8 mm: lower excursion-limited SPL | + |
| Audax PR300T4 vp série | 36 +1 | 0.349 -0.01 | 114 -21 | 4 -0.8 | 94.7 = | close | Xmax 4 mm < 4.8 mm: lower excursion-limited SPL | + |
| Eminence DELTALITE II 2512 v2 | 37 +2 | 0.386 +0.03 | 147 +12 | 4.9 +0.1 | 96.3 +1.6 | close | + | |
| Audio Dynamique 320/75 | 32 -3 | 0.341 -0.01 | 116 -19 | 5 +0.2 | 93.8 -0.9 | close | + | |
| Focal 13V 7511 | 31.2 -3.8 | 0.353 = | 154.2 +19.2 | 6.8 +2 | 93.6 -1.1 | close | + | |
| Infinity 1211W | 35.1 +0.1 | 0.397 +0.04 | 123.3 -11.7 | 4.5 -0.3 | 97 +2.3 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 4.5 mm < 4.8 mm: lower excursion-limited SPL | + |
| AE Speakers TD12S | 31.5 -3.5 | 0.336 -0.02 | 159.4 +24.4 | 7 +2.2 | 94.9 +0.2 | close | + | |
| MCM Electronics 55-2982 | 36.2 +1.2 | 0.407 +0.05 | 121.7 -13.3 | 7 +2.2 | 93.9 -0.8 | close | + |
Compare the closest 3 against the 12BR70 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.