Beyma 112Nd/W
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 48 Hz |
| Qts | 0.415 |
| Qes | 0.43 |
| Qms | 12.2 |
| Vas | 55 L |
| Sd | 550 cm² |
| Xmax | 7.4 mm |
| Re | 5.6 Ω |
| Bl | 18.2 T·m |
| Mms | 84.8 g |
| Pe | 700 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 112 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 28.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 12NLW9300 v2022 | 47 -1 | 0.416 = | 56 +1 | 8 +0.6 | 95.4 +0.4 | close | + | |
| 18 Sound 12NLW9300 | 47 -1 | 0.42 +0.01 | 56 +1 | 8 +0.6 | 97 +2 | close | + | |
| Eminence OMEGA PRO-12-2KW-8 | 48.14 +0.14 | 0.39 -0.02 | 49.55 -5.45 | 7.1 -0.3 | 93.33 -1.67 | close | Xmax 7.1 mm < 7.4 mm: lower excursion-limited SPL | + |
| P.Audio SN-12LF | 48 = | 0.399 -0.02 | 67.9 +12.9 | 7.2 -0.2 | 96 +1 | close | Xmax 7.2 mm < 7.4 mm: lower excursion-limited SPL | + |
| B&C 12NDL88 | 50 +2 | 0.37 -0.04 | 55 = | 8 +0.6 | 97 +2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 12 NDL 88 16 Ohms | 50 +2 | 0.363 -0.05 | 55 = | 7.1 -0.3 | 93.1 -1.9 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 7.1 mm < 7.4 mm: lower excursion-limited SPL | + |
| Oberton 12B45V | 47.88 -0.12 | 0.354 -0.06 | 58.51 +3.51 | 10.5 +3.1 | 94 -1 | close | 450 W vs 700 W: lower power handling | + |
| 18 Sound 12NTLS3500 | 41 -7 | 0.41 -0.01 | 65 +10 | 7.9 +0.5 | 93.5 -1.5 | close | + | |
| Eminence DEFINIMAX 4012HO | 51 +3 | 0.35 -0.06 | 53.801 -1.2 | 6.2 -1.2 | 94.8 -0.2 | close | Xmax 6.2 mm < 7.4 mm: lower excursion-limited SPL | + |
| Beyma 12"LX60V2 | 49 +1 | 0.38 -0.03 | 43 -12 | 9 +1.6 | 96 +1 | close | + |
Compare the closest 3 against the 112Nd/W →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.