Beyma 10XC25
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 63 Hz |
| Qts | 0.376 |
| Qes | 0.4 |
| Qms | 6.3 |
| Vas | 41 L |
| Sd | 380 cm² |
| Xmax | 4.5 mm |
| Re | 6.1 Ω |
| Bl | 13.8 T·m |
| Mms | 31.5 g |
| Pe | 250 W |
| Sensitivity | 97.2 dB |
Alignment hint
| EBP | 158 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sica 10 N 2.5 PL | 57 -6 | 0.36 -0.02 | 40.9 -0.1 | 4.5 = | 96.6 -0.6 | close | + | |
| SICA 10 N 2.5 PL v2017 | 57 -6 | 0.357 -0.02 | 40.9 -0.1 | 4.5 = | 96.5 -0.7 | close | + | |
| Ciare PFXI10.50W | 58 -5 | 0.374 = | 38.5 -2.5 | 4.4 -0.1 | 96 -1.2 | close | Xmax 4.4 mm < 4.5 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN 10-275 | 60 -3 | 0.343 -0.03 | 42.4 +1.4 | 5 +0.5 | 97.5 +0.3 | close | + | |
| LaVoce WSF101.82 | 64 +1 | 0.4 +0.02 | 41.6 +0.6 | 3.6 -0.9 | 97.4 +0.2 | close | 150 W vs 250 W: lower power handling · Xmax 3.6 mm < 4.5 mm: lower excursion-limited SPL | + |
| PHL Audio 3020 | 60 -3 | 0.337 -0.04 | 41 = | 4.1 -0.4 | 97.6 +0.4 | close | Xmax 4.1 mm < 4.5 mm: lower excursion-limited SPL | + |
| Sica 10 Fe 2.5 CP | 57 -6 | 0.37 -0.01 | 39.7 -1.3 | 4 -0.5 | 96.3 -0.9 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| SICA 10 FE 2.5 CP v2017 | 57 -6 | 0.365 -0.01 | 39.7 -1.3 | 4 -0.5 | 96.3 -0.9 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN PRO 10-300 | 58 -5 | 0.322 -0.05 | 41 = | 4.7 +0.2 | 97.2 = | close | + | |
| RCF MB 10N251 (prodance) | 58.9 -4.1 | 0.33 -0.05 | 38.8 -2.2 | 4.8 +0.3 | 97.3 +0.1 | close | + |
Compare the closest 3 against the 10XC25 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.