Beyma 10WR300
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 47 Hz |
| Qts | 0.287 |
| Qes | 0.31 |
| Qms | 3.9 |
| Vas | 50.5 L |
| Sd | 350 cm² |
| Xmax | 5.8 mm |
| Re | 6 Ω |
| Bl | 14.9 T·m |
| Mms | 39 g |
| Pe | 300 W |
| Sensitivity | 95.5 dB |
Alignment hint
| EBP | 152 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 10 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 10PR320 | 48 +1 | 0.29 = | 52.7 +2.2 | 7.37 +1.57 | 96 +0.5 | close | + | |
| Beyma 10"G40 | 45 -2 | 0.3 +0.01 | 49 -1.5 | 7 +1.2 | 95 -0.5 | close | + | |
| 18 Sound 10NW650 | 51 +4 | 0.27 -0.02 | 50 -0.5 | 7 +1.2 | 95.5 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| Beyma 10MW/ND | 47 = | 0.26 -0.03 | 48 -2.5 | 5.9 +0.1 | 96.3 +0.8 | close | + | |
| 18 Sound 10NW650 | 51 +4 | 0.28 -0.01 | 48 -2.5 | 7 +1.2 | 96 +0.5 | close | + | |
| Beyma 10G40 v2016 | 45 -2 | 0.306 +0.02 | 49 -1.5 | 6.6 +0.8 | 94.5 -1 | close | + | |
| Eminence KAPPALITE 3010LF-4 vp | 43.1 -3.9 | 0.281 -0.01 | 49.3 -1.2 | 8.4 +2.6 | 96.5 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| SICA 10 S 3 CP 4 Ohms | 44 -3 | 0.281 -0.01 | 51.3 +0.8 | 7 +1.2 | 97.7 +2.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 10LW30 | 42 -5 | 0.293 +0.01 | 55 +4.5 | 7 +1.2 | 94.6 -0.9 | close | + | |
| Sica 10 N 3 PL | 51 +4 | 0.29 = | 40.5 -10 | 5.5 -0.3 | 96.1 +0.6 | close | Xmax 5.5 mm < 5.8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10WR300 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.