← all drivers

Beyma 10MI100 v2017

10" · 8 Ω · 350 W · 97.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs50 Hz
Qts0.213
Qes0.22
Qms6.6
Vas54 L
Sd380 cm²
Xmax4.5 mm
Re6.3 Ω
Bl18.5 T·m
Mms38 g
Pe350 W
Sensitivity97.9 dB

Alignment hint

EBP227 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 5.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Beyma 10"MI10050 =0.21 =54 =4.5 =98 +0.1close+
Eminence KAPPALITE 3010 MB50.7 +0.70.204 -0.0152.1 -1.95 +0.599.1 +1.2close+
Faital PRO 10PR30050 =0.24 +0.0349.8 -4.24.92 +0.4296 -1.9close4 Ω vs 8 Ω: amp load changes+
Beyma 10M25050 =0.214 =64 +103.5 -199 +1.1close250 W vs 350 W: lower power handling · Xmax 3.5 mm < 4.5 mm: lower excursion-limited SPL+
Dayton Audio APOLLO 10N54 +40.222 +0.0143.5 -10.54.3 -0.297.1 -0.8close250 W vs 350 W: lower power handling · Xmax 4.3 mm < 4.5 mm: lower excursion-limited SPL+
Beyma 10G20045 -50.251 +0.0456.1 +2.14.5 =96.2 -1.7close200 W vs 350 W: lower power handling+
Warehouse Sound WGS 12L49.6 -0.40.242 +0.0350.5 -3.53.3 -1.297.3 -0.6usable200 W vs 350 W: lower power handling · Xmax 3.3 mm < 4.5 mm: lower excursion-limited SPL+
Eminence Kappa Pro-10A46 -40.2 -0.0152.2 -1.83.2 -1.397 -0.9usableXmax 3.2 mm < 4.5 mm: lower excursion-limited SPL+
Eminence KAPPA PRO 1046 -40.196 -0.0252.2 -1.83.2 -1.396.9 -1usableXmax 3.2 mm < 4.5 mm: lower excursion-limited SPL+
Eminence KAPPA PRO 10 A46 -40.196 -0.0252.2 -1.83.2 -1.396.9 -1usableXmax 3.2 mm < 4.5 mm: lower excursion-limited SPL+

Compare the closest 3 against the 10MI100 v2017 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.