Beyma 10MCS 500
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 65 Hz |
| Qts | 0.31 |
| Qes | 0.33 |
| Qms | 10.1 |
| Vas | 24 L |
| Sd | 350 cm² |
| Xmax | 8 mm |
| Re | 5.6 Ω |
| Bl | 17.6 T·m |
| Mms | 44 g |
| Pe | 500 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 197 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10MC500 | 65 = | 0.29 -0.02 | 24 = | 8 = | 97 +0.5 | close | + | |
| 18 Sound 10NTLW2500 | 65 = | 0.33 +0.02 | 21 -3 | 7.6 -0.4 | 96.5 = | close | Xmax 7.6 mm < 8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH520 | 60 -5 | 0.29 -0.02 | 23.5 -0.5 | 7.25 -0.75 | 97 +0.5 | close | Xmax 7.25 mm < 8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH520 | 60 -5 | 0.32 +0.01 | 22.7 -1.3 | 7.25 -0.75 | 95 -1.5 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.25 mm < 8 mm: lower excursion-limited SPL | + |
| 18 Sound 10NTLW2500 | 61 -4 | 0.27 -0.04 | 22 -2 | 7.6 -0.4 | 96.5 = | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.6 mm < 8 mm: lower excursion-limited SPL | + |
| B&C 10CXN64 | 68 +3 | 0.31 = | 23 -1 | 5.5 -2.5 | 95.2 -1.3 | close | 250 W vs 500 W: lower power handling · Xmax 5.5 mm < 8 mm: lower excursion-limited SPL | + |
| B&C 10CL64 | 63 -2 | 0.31 = | 22.2 -1.8 | 5.2 -2.8 | 96 -0.5 | close | 250 W vs 500 W: lower power handling · Xmax 5.2 mm < 8 mm: lower excursion-limited SPL | + |
| 18 Sound 10MB600 | 64 -1 | 0.33 +0.02 | 27.6 +3.6 | 6.5 -1.5 | 98 +1.5 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 6.5 mm < 8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH500 | 60 -5 | 0.26 -0.05 | 25.8 +1.8 | 7.5 -0.5 | 96 -0.5 | close | Xmax 7.5 mm < 8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH530 | 60 -5 | 0.25 -0.06 | 23.5 -0.5 | 7.5 -0.5 | 97 +0.5 | usable | Xmax 7.5 mm < 8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10MCS 500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.